Table of Contents
Advertisement
Features
The following list identifies the key features supported by the FS752TP:
•
The 10/100/1000 Base-T ports are auto-sensing using RJ-45 UTP connectors.
•
Auto MDI/MDI-X sensing and auto-negotiation is supported on all ports.
•
Full-duplex flow control.
•
Half-duplex back pressure control.
•
Head-of-line blocking prevention .
•
MAC aging.
•
Static MAC addresses entry and dynamic MAC addresses learning.
•
VLANs
•
IEEE 802.1Q up to 128 VLAN entries.
•
Protected ports functionality which is similar to Port based VLANs.
•
802.3ad Link Aggregation.
•
Setting LAGs manually or dynamically using LACP.
•
Auto-Voice VLAN.
•
Port mirroring (many to one), including the ability to Mirror RX, TX, or both.
•
CoS and QoS.
•
Broadcast, Multicast, and Unknown Unicast storm protection by specifying the threshold
as a percentage of port-speed.
•
Spanning Tree (IEEE 802.1d).
•
IEEE 802.1s MSTP and IEEE 802.1w, Rapid Reconfiguration Spanning Tree.
•
L4 QoS ACL.
•
Policy-based DiffServ.
•
NETGEAR Green product series power-saving features:
•
Per port automatic power down when the port link is down.
FS752TP Smart Switch
Introduction
7
Advertisement
Table of Contents
Troubleshooting
