Oki CX1145 MFP Safety & Warranty Manual page 15

Preventive Measures ________________
Personal Protective Equipment
Respiratory Protection: Not required under normal use
Eye Protection: Not required under normal use.
Engineering Controls
Ventilation: Outside of normal ventilation, not normally
required.
Other Protective Equipment and/or Hygienic
Practices: None.
Spill Cleanup
Small Spills
1. Remove sources of ignition.
2. Carefully clean up the spill with a wet cloth, avoiding
inhalation of fine dust.
Large Spills
1. Remove sources of ignition and keep unnecessary and
unprotected personnel away from area.
2. Wear protective gear: respirator, rubber gloves, safety
goggles.
3. Vacuum the spill, put in a sealable container, then wipe
up remainder with a wet cloth.
4. Wash thoroughly with soap and cold water.
Waste Disposal
• Prevent release of material into natural waters and
sewers.
• Follow appropriate federal, state and local regulations.
• Large amounts must be passed to a licensed waste
contractor.
• Container can be recycled.
Precautions
Precautions for Handling or Storage: Protect from the
sun. Store in a cool and dry room under 104°F (40°C).
Keep out of reach of children.
Other Precautions: Keep away from excessive heat, sparks,
and open flames.
Shipping Information
Special Shipping Information: Non hazardous. Handle
container carefully to avoid shock. Do not drop. Keep dry.
UN Number: None.
Hazards Class: None.
User's Responsibility ________________
This bulletin cannot cover all possible situations which the user
may experience when using this product. Each aspect of your
operation must be examined in regard to if, or where,
additional precautions may be necessary. All health and safety
information contained in this bulletin must be provided to your
employees or customers. It is your responsibility to use this
information to develop appropriate work practice guidelines
and employee instructional programs for your operation.
Preparation Date of MSDS ____________
Date: January 15, 2009.
Prepared by:
Oki Data Americas, Inc
Engineering Services Department.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: (856) 235-2600
Fax: (856) 222-5320
http://www.okiprintingsolutions.com
my.okidata.com
15: English