Rma License Transfer - Cisco WS-C1924-A - Catalyst 1900 24 Ports 10MB Switch Hardware Installation Manual

RMA License Transfer

•
•
Note
Install the license file using one of the following options:
Step 3
•
•
•
•
Figure 6-1
Figure 6-1
RMA License Transfer
To transfer a software license from a failed device to a new device, go to the Cisco licensing portal at
http://www.cisco.com/go/license.
Cisco 1900 Series Hardware Installation
6-2
Cisco License Registration Portal: Cisco license registration portal is a web-based portal for
getting and registering individual software licenses. It is available at
http://www.cisco.com/go/license.
Cisco License Call Home: Use the Cisco License Call Home interface on the router to directly
interact with the Cisco Product License Registration portal.
You will need the serial number (SN) and product ID (PID) of the router where the license should
be installed. See the "Product Serial Number Location" section on page 1-6
the SN and PID.
Cisco License Manager (CLM).
Cisco License Call Home.
Cisco IOS CLI: Use the Cisco IOS CLI to install and manage licenses.
Simple Network Management Protocol (SNMP): Use SNMP to install and manage software
licenses.
shows the steps for software activation.
Steps for Software Activation
1
Purchase a Package or Feature
Receive a PAK
2
Obtain a License.
A PAK and UDI is required
3
Install License
Chapter 6
Option 1
Option 2
Receive
License File
Option 3
Getting Software Licenses for the Router
for the location of
Cisco License Manager
Cisco License Portal
Http://www.cisco.com
Cisco Call Home
OL-19084-02