Rma License Transfer - Cisco 1900 series Hardware Installation

RMA License Transfer

Install the license file using one of the following options:
Step 4
•
•
•
•
Figure 1 - shows the steps for software activation.
Figure 1
RMA License Transfer
To transfer a software license from a failed device to a new device, go to the Cisco licensing portal at
http://www.cisco.com/go/license.
You will need the SN and PID of the defective device, as well as the RMA router to initiate an RMA
Note
replacement license.
Cisco 1900 Series Hardware Installation
7-2
Cisco License Manager (CLM) - CLM is a free software application available at
http://www.cisco.com/go/clm.
Cisco License Call Home - Use the Cisco License Call Home interface on the router to directly
interact with the Cisco Product License Registration portal.
Cisco IOS CLI - Use the Cisco IOS command line interface (CLI) to install and manage licenses.
Simple Network Management Protocol (SNMP) - Use SNMP to install and manage software
licenses.
Steps for Software Activation
1
Purchase a Package or Feature
Receive a PAK
2
Obtain a License.
A PAK and UDI is required
3
Install License
Chapter 7
Option 1
Option 2
Receive
License File
Option 3
Getting Software Licenses for the Router
Cisco License Manager
Cisco License Portal
Http://www.cisco.com
Cisco Call Home
OL-19084-02