Software License - Cisco uBR925 Quick Start User Manual

Software License

PLEASE READ THIS SOFTWARE LICENSE CAREFULLY BEFORE DOWNLOADING,
INSTALLING OR USING CISCO OR CISCO-SUPPLIED SOFTWARE.
BY DOWNLOADING OR INSTALLING THE SOFTWARE, OR USING THE EQUIPMENT THAT
CONTAINS THIS SOFTWARE, YOU ARE CONSENTING TO BE BOUND BY THIS LICENSE. IF
YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS LICENSE, THEN (A) DO NOT
DOWNLOAD, INSTALL, OR USE THE SOFTWARE, AND (B) YOU MAY RETURN THE
SOFTWARE FOR A FULL REFUND, OR, IF THE SOFTWARE IS SUPPLIED AS PART OF
ANOTHER PRODUCT, YOU MAY RETURN THE ENTIRE PRODUCT FOR A FULL REFUND.
YOUR RIGHT TO RETURN AND REFUND EXPIRES 30 DAYS AFTER PURCHASE FROM CISCO
OR AN AUTHORIZED CISCO RESELLER, AND APPLIES ONLY IF YOU ARE THE ORIGINAL
PURCHASER.
The following terms govern your use of the Software except to the extent a particular program (a) is
the subject of a separate written agreement with Cisco or (b) includes a separate "click-on" license
agreement as part of the installation and/or download process. To the extent of a conflict between the
provisions of the foregoing documents, the order of precedence shall be (1) the written agreement, (2)
the click-on agreement, and (3) this Software License.
License. Subject to the terms and conditions of and except as otherwise provided in this Agreement,
Cisco Systems, Inc. or the Cisco Systems, Inc. subsidiary licensing the Software, if sale is not directly
by Cisco Systems, Inc. ("Cisco"), and its suppliers grant to Customer ("Customer") a nonexclusive
and nontransferable license to use the specific Cisco program modules, feature set(s) or feature(s) for
which Customer has paid the required license fees (the "Software"), in object code form only. In
addition, the foregoing license shall also be subject to the following limitations, as applicable:
• Unless otherwise expressly provided in the documentation, Customer shall use the Software solely as embedded
in, for execution on, or (where the applicable documentation permits installation on non-Cisco equipment) for
communication with Cisco equipment owned or leased by Customer;
• Customer's use of the Software shall be limited to use on a single hardware chassis, on a single central
processing unit, as applicable, or use on such greater number of chassis or central processing units as Customer
may have paid Cisco the required license fee; and
• Customer's use of the Software shall also be limited, as applicable and set forth in Customer's purchase order
or in Cisco's product catalog, user documentation, or web site, to a maximum number of (a) seats (i.e., users
with access to the installed Software), (b) concurrent users, sessions, ports, and/or issued and outstanding IP
addresses, and/or (c) central processing unit cycles or instructions per second. Customer's use of the Software
shall also be limited by any other restrictions set forth in Customer's purchase order or in Cisco's product
catalog, user documentation, or web site for the Software.
Note For evaluation or beta copies for which Cisco does not charge a license fee, the above
requirement to pay a license fee does not apply.
25