Powering Up The Router; Checklist Before Powering Up The Cisco Router - Cisco WS-C1924-A - Catalyst 1900 24 Ports 10MB Switch Hardware Installation Manual

Configuring the Router
This chapter describes how to power up the router and perform the initial configuration in the following
sections:
•
•
•

Powering up the Router

Blank faceplates and cover panels serve three important functions: they prevent exposure to
Warning
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement
1029
•
•
•

Checklist Before Powering Up the Cisco Router

Check the following items before powering up the router:
•
•
•
OL-19084-02
Powering up the Router, page 5-1
Performing the Initial Configuration on the Router, page 5-3
Using the Cisco Setup Command Facility, page 5-3
-
Using Cisco Configuration Professional Express, page 5-6
-
Using the Cisco CLI-Manual Configuration, page 5-6
-
Verifying the Initial Configuration, page 5-23
Checklist Before Powering Up the Cisco Router, page 5-1
Powering Up the Cisco Router, page 5-2
Verifying the Front Panel LED Indications, page 5-3
You have securely mounted and grounded the chassis.
You have connected the power and interface cables.
You have properly seated the external Compact Flash memory card into its slot. For installation
instructions, see Installing and Upgrading Internal Modules and FRUs in Cisco 1900 Series
5
C H A P T E R
Cisco 1900 Series Hardware Installation
ISRs.
5-1