Specifying An F Code To Register A Destination - Konica Minolta bizhub 215 User Manual

4.1 Transmission with F-Code (F-Code TX)
4.1.2

Specifying an F code to register a destination

When registering one-touch dial or speed dial, specify an F code.
1
Enter a destination fax number using the Keypad.
2
Press ,.
3
Use +, to select [SUB, SID SETTING], and press the OK key.
4
Enter a SUB address using the Keypad, and press the OK key.
% To correct a numeric value, press the Clear/Stop key.
% When entering a password, go to Step 5.
% When not entering a password, press the OK key, and go to Step 6.
5
Enter the password using the Keypad, and press the OK key.
% To correct a numeric value, press the Clear/Stop key.
6
Press OK.
Continuously, register other items.
bizhub 215
4
4-3