HP 1800 24G - ProCurve Switch Installation And Getting Started Manual page 47

Index
B
basic troubleshooting tips ... 4-1
blinking LEDs
error indications ... 4-2–4-3
C
cabinet
mounting the switch in ... 2-6, 2-9
cables
connecting cables to switch ports ... 2-10–2-11
infrastructure requirements ... 2-3
cabling infrastructure ... 2-3
connecting the switch to a power source ... 2-10
connector specifications ... A-2
D
description
LEDs ... 1-2
switch ... 1-1
E
electrical specifications, switch ... A-1
EMC regulatory statements ... B-8
environmental specifications, switch ... A-1
H
horizontal surface
mounting switch on ... 2-10
I
included parts ... 2-1
installation
connecting the switch to a power source ... 2-10
horizontal surface mounting ... 2-10
location considerations ... 2-4
network cable requirements ... 2-3
precautions ... 2-2
rack or cabinet mounting ... 2-6, 2-9
site preparation ... 2-3
L
LEDs
behavior during self test ... 2-5
descriptions of ... 1-2
error indications ... 4-2–4-3
LED Mode View select indicators ... 1-2
Power ... 1-2
behavior during self test ... 2-5
location for the switch, considerations ... 2-4
M
mounting the switch
in a rack or cabinet ... 2-6, 2-9
precautions ... 2-2
on a horizontal surface ... 2-10
N
network cables
required types ... 2-3
network devices
connecting to the switch ... 2-10–2-11
network ports
connecting to ... 2-10–2-11
standards compliance ... A-2
P
parts, included with the switch ... 2-1
physical specifications, switch ... A-1
port LEDs
normal operation ... 2-5
ports
10/100Base-TX, location on switch ... 1-1
connecting to ... 2-10–2-11
network connections ... 2-10–2-11
Power LED ... 1-2
behavior during self test ... 2-5
behaviors ... 1-2
power source
connecting the switch to ... 2-10
Index-1