Canon 0989B001AA Advanced Manual page 42

Advanced Fax Features
1
Faxing Problems (MF3240 Only)
Advanced Copy
Features 2
■
Sending Problems
System Monitor
3
Cannot send a fax.
Reports and Lists
4
Troubleshooting
5
Appendix
6
Table of Contents
Index
Q Is the machine overheated?
A Unplug the machine and let it cool for about 5
minutes. Then plug in the machine and try sending
again.
Q Did you just connect the power cord to the
machine?
A Wait for a while. After connecting the power cord,
the machine cannot scan documents immediately.
Q Is the machine set for the correct telephone line
type?
A Make sure the machine is set for the correct
telephone line type. (See "Set the Telephone Line
Type," in the Starter Guide.)
Back Previous
Is your machine in fax mode?
Q
A Press [FAX] to show fax standby display.
Q Is the document loaded correctly?
A Make sure the document is correctly loaded. (See
Chapter 2, "Document Handling," in the Basic
Guide.)
A Make sure the front cover is fully closed.
Q Is the one-touch speed dialing key or coded
dialing code you entered registered correctly?
A Check that the speed dialing settings are
registered correctly. (See Chapter 4, "Sending
Faxes (MF3240 Only)," in the Basic Guide.)
TOP
Next
5-4