Reducing Received Images - Canon 0989B001AA Advanced Manual

Advanced Fax Features
1
Advanced Copy
Features 2
System Monitor
3
Reports and Lists
4
Troubleshooting
5
Appendix
6
Table of Contents
Index
1.
Press [Additional Functions].
2.
Use [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
3.
Use [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
4.
Use [ ] or [ ] to select <REMOTE RX>,
then press [OK].
5.
Use [ ] or [ ] to select <ON>, then press
[OK].
6.
Use the numeric keys to enter the remote
reception ID (00 to 99), then press [OK].
7.
Press [Stop/Reset] to return to standby
mode.
Back Previous
Receiving a Fax Remotely
The following procedure is available only when the machine
receives the tone signal.
1.
When you receive a call, pick up the handset
of the external telephone.
2.
Use the numeric keys to enter the two-digit
remote reception ID to start reception.
3.
When the reception starts, hang up the
telephone.
■

Reducing Received Images

When a received document is divided and printed over multiple
pages of paper, the data contained in the bottom 8 mm of a
page are duplicated at the top of the following page, making the
duplicated section easier to read.
You can also print received documents in a reduced size or cut
off the end of a document that does not fit on one page.
1.
Press [Additional Functions].
2.
Use [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
3.
Use [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
4.
Use [ ] or [ ] to select <RX
REDUCTION>, then press [OK].
TOP
Next
1-11