Memory Reception; Reception Restriction; Remote Reception - Canon 0989B001AA Advanced Manual

Advanced Fax Features
1
Advanced Copy
Features 2
System Monitor
3
Reports and Lists
4
Troubleshooting
5
Appendix
6
Table of Contents
Index
■

Memory Reception

The machine automatically receives faxes in memory when
printing is disabled under certain conditions (e.g., toner or paper
has run out).
When the problem is cleared, the machine automatically prints
the fax which was stored in the memory.
NOTE
– The machine memory can store up to 256 fax jobs or approximately
256 pages.*
*Based on the condition that the other party sends the fax by the
MF3200 Series with ITU-T Standard Chart No.1, standard mode. The
maximum number of pages that the machine's memory can store
differs depending on the other party's machine.
– Once the pages are printed, they are deleted from the memory.
– If the memory becomes full, you will not be able to receive the
remaining pages. Contact the other party and ask them to resend the
remaining pages of the fax.
Back Previous
■

Reception Restriction

You can reject incoming faxes without sending their numbers in
the machine.
1.
Press [Additional Functions].
2.
Use [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
3.
Use [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
4.
Use [ ] or [ ] to select <RX
RESTRICTION>, then press [OK].
5.
Use [ ] or [ ] to select <ON>, then press
[OK].
■

Remote Reception

Remote reception enables you to use an external telephone
connected to the machine to receive faxes manually. This can
be useful when the machine is not nearby or is being used by
someone else.
Registering Remote Reception ID
Follow this procedure if you want to change the default remote
reception ID of 25.
TOP
Next
1-10