Related Manuals for Scott GAMBLER - 2011
Summary of Contents for Scott GAMBLER - 2011
- Page 1 SCOTT 2011 GAMBLER BIKE OWNERS MANUAL SCOTT SPORTS SA | 17 RTE DU CROCHET | 1762 GIVISIEZ | SWITZERLAND © 2009 SCOTT SPORTS SA, ALL RIGHTS RESERVED | SCOTT-SPORTS.COM...
- Page 2 The Gambler should be adjusted exactly to the current rider for reaching maximum safety and fun while riding. 3 different rear travel options P. 009 All adjustments should be done at the local Scott dealer Recommended Tools for the Shock Set-Up P. 009 or following to this manual.
- Page 3 DH bike offering rear wheel travel between 190 and 230 mm. Scott does not see frame, rear shock and kinematics as single components which are assembled together on a bike, but as a concept with all these components working together and offering an outrageous function by matching perfectly.
- Page 4 6 x 61902 (28 x 15 x T7) 3. IMPORTANT: 4. tighten the 3 screws with Please make sure that there is no gap 5Nm/44in-lbs between the collar on the downside of the insert and the head tube clamp on the frame. 2011 SCOTT BIKE OWNERS MANUAL...
- Page 5 On Gambler you have 2 options for the headset diameter (1 1/8” and 1.5”). On Gambler you have 3 options for the rear travel as shown on the drawing below: You can order the headtube inserts via your local Scott dealer with: 210127 Headtube Insert Gambler 1 1/8”...
- Page 6 For further details on the shock set-up please follow the indications of the rear shock manufacturer attached to this bike. Mounting the rear shock in a different position can cause severe damages to the frame, the linkage levers and the rear shock. 2011 SCOTT BIKE OWNERS MANUAL...
-
Page 7: Ids Drop Out System
The Gambler offers the possibility not only to change drop out hanger in case of Gambler bike, as we have chosen carefully both parts for a perfect matching damage, you also can choose between different 3 different drop outs of the Scott IDS combination. -
Page 8: Pivot Maintenance
We recommend the same for the chain also. If you have to change the bearings you can order them included in a service kit (Scott article number: 210126) at your local SCOTT dealer or buy them with international parts number as shown above in the specs list in a hardware store. - Page 9 In case such an annual maintenance service has not been effected the warranty of 5 years for the frame shall be reduced to 3 years. Costs for maintenance and service have to be born by the owner of the SCOTT bike. Date of purchase On Gambler, Voltage Fr and Volt-X the warranty period is limited to 2 years.