Advertisement
SET-UP OF OTHER SHOCK MODELS
Scott strongly recommends using only the originally specified shock with the
Gambler bike, as we have chosen carefully both parts for a perfect matching
combination.
If you want to use a different rear shock model than the one originally on the bike,
please make sure that the shock will not in any position hit the frame and cause a
damage to the frame.
Please follow the instruction below:
Please make sure that the rear shock or its accessory parts do not touch the frame
when mounting or suspending.
For doing so release the air/remove the coil, install the shock and compress the shock
completely.
If the shock touches the frame while doing so, do not use this shock in order to avoid
damage to frame, swingarm or shock
ADJUSTMENT OF SEATPOST-HEIGHT
IMPORTANT:
The seatpost has to be inserted into the seattube at a minimum of 80mm.
Never use another seatpost diameter than 34.9mm or try to use a shim/reducer
between seatpost and frame.
When lowering down the seatpost, please make sure that it will not hit the shock
below while riding! This could result in serious damage on bike parts and result in
a dangerous riding condition.
12
2011 SCOTT BIKE OWNERS MANUAL
IDS DROP OUT SYSTEM
The Gambler offers the possibility not only to change drop out hanger in case of
damage, you also can choose between different 3 different drop outs of the Scott IDS
(Interchangeable Drop-Out System):
Inline you will find on Gambler FR
following drop out:
Another Option is SRAM-Maxle System for 12mm/150mm through axle hubs
(same length as your FR dropout), available at your local authorized Scott dealer:
Inline on Gambler DH you will find
following drop out
(10mm longer as FR drop out):
13
Advertisement
