Advertisement
TECHNICAL DATA GAMBLER
Travel
190 / 210 / 230mm
Suspension Ratio
2.5 / 2.75 / 3.0
Piston stroke
76mm
Shock length (Eye to Eye) 241mm
Hardware Mainframe
22,2mm x 8mm
Hardware Swingarm
40mm x 8mm
Seatpost diameter
34,9mm
Headset
1 1/8" or 1.5", depending on headtube insert
Fork travel
180 - 200mm
Fork length
568mm
BB housing
83mm
Chainguide system
ISCG / ISCG05 tab
Rear Hub Width
150mm
Bearings
2 x 61901 (24 x 12 x T6)
6 x 61902 (28 x 15 x T7)
6
2011 SCOTT BIKE OWNERS MANUAL
ADJUSTMENT OF HEAD ANGLE
On Gambler you can adjust the headangle within a few minutes for a better handling
depending on your riding style and track condition/style.
How to adjust the headangle:
You need
- a 4mm Allen key bit for a tighening torque key
- a 56mm wrench (attached to this bike)
1. Loose the three screws on the head of the headtube with a 4mm allen key but
do not remove them completely. These screws hold the insert in Place.
Please note that it is not necessary to disassemble the fork or any other
components.
2. Turn the insert with the 56mm wrench which is attached to your bike/frameset.
The slot of the insert should always be in line with the slot of the headtube clamp.
The resulting angle is engraved in the insert for both options.
3. IMPORTANT:
Please make sure that there is no gap
between the collar on the downside of
the insert and the head tube clamp on
the frame.
4. tighten the 3 screws with
5Nm/44in-lbs
7
Advertisement
