Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009 Manual page 96

7.4.8 Assigning an Image to a Point of
Service Terminal
You can manually assign a specific image to a Point of Service terminal through its
scWorkstation object.
The following command assigns 'myMinimal' image 2.0.4 to the CR001
scWorkstation object in the east-boston location (type the command all on one
line):
posAdmin.pl --user cn=admin,o=mycorp,c=us --password secret
--modify --scWorkstation
--scPosImageDn cn=myMinimal,cn=default,cn=global,o=mycorp,c=us
--scPosImageVersion 2.0.4
--DN cn=CR001,cn=east,ou=boston,o=mycorp,c=us
When you explicitly assign an image name (scPosImageDn) and its version
(scPosImageVersion) in the scWorkstation entry, the version and active/pas-
sive status information in the corresponding scPosImage image object in the global
container is ignored. However, if you only assign the image name, the version informa-
tion in the scPosImage image object is used.
The scWorkstation object is automatically created in the LDAP directory the first
time you boot a Point of Service terminal. The posleases2ldap daemon automatically
triggers posldap2crconfig.pl which then creates an scWorkstation object
and hardware configuration files for each Point of Service terminal that registers on the
Branch Server.
7.4.9 Removing Images
To remove the image assigned to a workstation, run the following command (type the
command all on one line):
posAdmin.pl --user cn=admin,o=mycorp,c=us --password secret
--modify --scWorkstation --scPosImageDn --scPosImageVersion
--DN cn=CR001,cn=east,ou=boston,o=mycorp,c=us
88 SUSE Linux Enterprise Point of Service Guide