Installing The Admind Client On Administration And Branch Servers - Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009 Manual

NOTE
The setup.admind file is located in the /usr/share/kiwi/SLEPOS/
templates/addons/directory. It references the RPMs required to add
the admind utility to a standard client image.
6 Distribute the image to your Point of Service terminals.
For information on this procedure, Section 7.5, "Distributing Images to Point of
Service Terminals" (page 89).
14.5 Installing the admind Client on
Administration and Branch
Servers
To install admind on an Administration or Branch Server:
1 Install the admind-client RPM on the Administration or Branch Server:
Start YaST, Software > Software Management, and select admind-client
for installation.
NOTE
It may also be necessary to install the tcpd, xinetd, and pidentd
RPMs.
2 Start identd using YaST: System > System Services (Runlevel) and enable identd.
Remotely Managing Point of Service Terminals with admind and adminc 191