Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009 Manual page 41

When deploying to a ramdisk of our specific machine, use the command:
posAdmin.pl --user cn=admin,o=mycorp,c=us --password
secret --base cn=cshr4152,cn=global,o=mycorp,c=us --add
--scRamDisk --cn ram --scDevice /dev/ram1
To add a scCashRegister object for a generic machine, use the command:
posAdmin.pl --user cn=admin,o=mycorp,c=us --password
secret --base cn=global,o=mycorp,c=us --add
--scCashRegister --cn cr-test-default
--scCashRegisterName default --scPosImageDn
cn=myGraphical,cn=default,cn=global,o=mycorp,c=us (note
the scCashRegisterName name ).
When deploying to a harddisk of our generic machine, use the command:
posAdmin.pl --user cn=admin,o=mycorp,c=us --password
secret --base cn=cr-test-default,cn=global,o=mycorp,c=us
--add --scHarddisk --cn sda --scDevice /dev/sda
--scHdSize 9000 --scPartitionsTable "1000 82 x;8000 83
/"
When deploying to a ramdisk of our generic machine, use the command:
posAdmin.pl --user cn=admin,o=mycorp,c=us --password
secret --base cn=cr-test-default,cn=global,o=mycorp,c=us
--add --scRamDisk --cn ram --scDevice /dev/ram1
• The posleases2ldap.pl process is started and running.
If all the conditions are satisfied, at the time the posleases2ldap.pl checks the
upload directory, the new config.MAC is created or overwritten and the uploaded
file hwinfo.MAC deleted.
The generated config.MAC file should contain lines reflecting values in the LDAP
database (the IP address is the address of the tftp service specified in ipHostNumber
under tftp scService object in the scBranchserver in the relevant
scLocation).
If deploying to a hard drive, assuming the tftp server has IP address 192.168.90.1, the
following lines should be present :
Basic Configuration 33