Creating Point Of Service Images; Creating The Required Ldap Objects - Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009 Manual

If deploying to a ram disk, the following line should be present:
IMAGE=/dev/ram1;myGraphical_test;3.1.4;192.168.90.1;8192

7.3 Creating Point of Service Images

Before you can deploy Point of Service terminals, you must first create the image files
containing the operating system, application files, and system settings required to boot
the terminals.
SUSE Linux Enterprise Point of Service provides image templates that can be customized
and generated on an Administration Server or a dedicated Image Building Server using
Image Creator. For information on the available image templates, see Section 1.4.1,
"Types of Images" (page 14).
To create the Point of Service images required to deploy your Point of Service terminals,
you must do the following:
1 Copy the image source files to your Image Building Server. For detailed instruc-
2 Define the location of the image source files. For detailed instructions, see Sec-
3 Build the Point of Service image files.
7.4 Creating the Required LDAP
The configuration parameters for each Point of Service terminal are stored in the central
LDAP directory on the Administration Server. Every Point of Service terminal has its
own Workstation object (scWorkstation) in the LDAP tree. The Workstation object
is automatically created when a Point of Service terminal registers on the Branch
Server. posldap2crconfig.pl uses information from the Hardware Reference
object (scCashRegister) and Image Reference object (scPosImage) to create
72 SUSE Linux Enterprise Point of Service Guide
tions, see Section 11.3.1, "Copying the SUSE Linux Enterprise Point of Service
CDs" (page 159).
tion 11.3.4, "Generating AdminServer.conf or Distribution.xml" (page 161).
Objects