Installing Admind On A Point Of Service Terminal - Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009 Manual

posGetIP [--ip|noip] [--mac]
Table 14.3, "posGetIP Command Options" (page 189) summarizes the available posGetIP
command options.
Table 14.3 posGetIP Command Options
Option Description
--ip Prints the IP addresses of all Point of Service terminals that are
managed by the local Branch Server.
This option is enabled by default.
--noip Provides a screen dump of the Point of Service terminals that are
managed by the local Branch Server. This option does not print
the IP addresses of the Point of Service terminals managed by
the current Branch Server.
--mac Prints the MAC address of all Point of Service terminals that are
managed by the local Branch Sever.
14.3.2 posGetIP Examples
adminc --command 6 `posGetIP`
adminc --wake `posGetip --mac --noip`
14.4 Installing admind on a Point of
Service Terminal
The following sections outline how to add admind to a terminal system image.
1 Use the Image Creator Tool to start this procedure.
For information about using Image Creator, see Chapter 12, Building Images
with the Image Creator Tool (page 163).
Remotely Managing Point of Service Terminals with admind and adminc 189