Creating An Object; Deleting An Object; Modifying An Object - Novell IMANAGER 2.7.3 - ADMINISTRATION Administration Manual

4 Select Copy ACL Rights if you want to copy access control list (ACL) rights to this object.
This step might take additional processing time, depending on your system and networking
environment.
NOTE: The copy object operation does not copy the following object attributes:
ACL (unless you select Copy ACL Rights)
CN
DirXML-Associations
Equivalent To Me
Group Membership
Member
Security Equals
Any naming attribute
Any Read Only attribute
Any RBS attribute

5.2.2 Creating an Object

1 In Roles and Tasks, click Directory Administration > Create Object.
2 Select the object class from the list that appears, then click OK.
3 Specify the requested information that appears according to the object class you selected, then
click OK.
If you are using a Mozilla browser, click the + symbol to add information instead of typing
directly in the field.
4 When the confirmation message appears, click OK, Repeat Task, or Modify.

5.2.3 Deleting an Object

1 In Roles and Tasks, click Directory Administration > Delete Object.
2 Type the name and context of the object, or use the Object Selector to find it, and click OK.
A confirmation message appears indicating the object was successfully deleted.

5.2.4 Modifying an Object

1 In Roles and Tasks, click Directory Administration > Modify Object.
2 Type the name and context of the object or use the Object Selector to find it, then click OK.
The Modify Object page displays pages with the selected object's attributes.
3 Modify the object as desired, then click OK.
If you are using a Mozilla browser, click the + symbol to add information instead of typing
directly in the field.
38 Novell iManager 2.7.3 Administration Guide