The Module Tab - Novell IMANAGER 2.7.3 - ADMINISTRATION Administration Manual

Defining/Modifying a Preferred Object Selection Method for a Task of a Property
Book
To define/modify a preferred object selection method for an existing task:
1 Under the Property Book tab, select the property book, then select Actions > Target Chooser
Mode.
2 From the Mode list, select the appropriate mode: single, multiple, simple, or advanced and click
OK.
A successful message is displayed. Click OK.
NOTE: For the changes to iManager Base Content module to take effect, restart Tomcat.

6.2.4 The Module Tab

The Module page lists the RBS modules currently installed on a selected collection. Each module
contains RBS property books and tasks. From this page, you can add (if you want to create a custom
property book) and delete modules, and also type a description for a selected plug-in module.
The RBS Collection Module tab lets you perform the following operations:
"Adding a New Plug-in Module" on page 63
"Deleting an RBS Module" on page 63
"Adding a description" on page 63
Adding a New Plug-in Module
To add a new plug-in module:
1 In the Module tab, select New.
2 Specify the RBS module name and a destination context, then click OK.
iManager displays a message indicating the module has been added.
Deleting an RBS Module
To delete an existing plug-in module:
1 In the Module tab, select a module to delete, then select Delete.
2 Click OK to confirm the module deletion.
Adding a description
To add a description to an existing plug-in module:
1 In the Module tab, select a module, then select Actions > Description.
2 Specify the module description, then click OK.
Configuring and Customizing iManager 63