Novell GROUPWISE 7 - DATABASES Manual page 82

/p
Specifies the post office directory where the user databases to time-stamp are located. This switch is
required.
Syntax:
Example:
/backup, /restore, and /retention
Specifies the time stamp on which to perform the operation. If no time stamp is specified, the
operation is performed on the backup time stamp.
Syntax:
For example, to set the restore time stamp, you would use:
NetWare:
Linux:
Windows:
/get
Lists existing backup, restore, and retention time stamp information for user databases. If no time
stamps are set, no times are displayed.
Syntax:
For example:
NetWare:
Linux:
Windows:
If no other operational switch is used, /get is assumed. The following example returns the same
results as the above example:
452 GroupWise 7 Administration Guide
NetWare GWTMSTMP
/p-volume:\post_office_dir
/p-mail:\dev
NetWare GWTMSTMP
/backup
/restore
/retention
gwtmstmp /p-j:\dev /restore /set
./gwtmstmp -p /gwsystem/dev -r -s
gwtmstmp /p-j:\dev /restore /set
NetWare GWTMSTMP
/get
gwtmstmp /p-j:\dev /get
./gwtmstmp -p /gwsystem/dev -g
gwtmstmp /p-j:\dev /get
Linux GWTMSTMP
-p /post_office_dir
-p /gwsystem/dev
Linux GWTMSTMP
-b
--backup
-r
--restore
-n
--retention
Linux GWTMSTMP
-g
--get
Windows GWTMSTMP
/p-drive:\post_office_dir
/p-j:\dev
Windows GWTMSTMP
/backup
/restore
/retention
Windows GWTMSTMP
/get