Novell GROUPWISE 7 - DATABASES Manual page 80

The results are written to the console.log file.
To set a current time stamp on all user databases in a post office, use the following command:
Syntax:
Example:
A basic backup time stamp can also be set in ConsoleOne. Select a Post Office object, then click
Tools > GroupWise Utilities > Backup/Restore Mailbox. On the Backup tab, select Backup, then
click Yes.
More specialized functionality is provided through additional GWTMSTMP startup switches. See
Section 34.3.5, "GWTMSTMP Startup Switches," on page
34.3.3 Running GWTMSTMP on Linux
The GWTMSTMP executable (gwtmstmp) is installed into the bin and lib subdirectories of /
opt/novell/groupwise/agents along with the GroupWise agents (POA and MTA). You
can copy it to additional locations if needed.
To check the existing time stamp on all GroupWise user databases in a post office, use the following
command:
Syntax:
Example:
The results are displayed on the screen.
To set a current time stamp on all user databases in a post office, use the following command:
Syntax:
Example:
A basic backup time stamp can also be set in ConsoleOne. Select a Post Office object, then click
Tools > GroupWise Utilities > Backup/Restore Mailbox. On the Backup tab, select Backup, then
click Yes.
More specialized functionality is provided through additional GWTMSTMP startup switches. See
Section 34.3.5, "GWTMSTMP Startup Switches," on page
34.3.4 Running GWTMSTMP on Windows
The GWTMSTMP program file (gwtmstmp.exe) is installed into the same directory where you
installed the GroupWise agents (POA and MTA). You can copy it to additional locations if needed.
450 GroupWise 7 Administration Guide
gwtmstmp.nlm /p-volume:\post_office_directory /set
gwtmstmp.nlm /p-sys:\gwsystem\dev /set
./gwtmstmp -p /post_office_directory
./gwtmstmp -p /gwsystem/acct
./gwtmstmp -p /post_office_directory --set
./gwtmstmp -p /gwsystem/acct --set
451.
451.