Novell GROUPWISE 7 - DATABASES Manual page 68

Backing Up Remote Domains and Post Offices
If the domains and post offices to back up are located on a different server from where the
GroupWise agents run, you must copy GWTSA (gwtsa.nlm), along with the GroupWise agent
engine (gwenn5.nlm), to the server where the data resides and run it there.
GWTSA Startup Switches
The following startup switches can be used with GWTSA:
/home
/ll
/log
/tempdir
/vserver
/home
Specifies the GroupWise location to back up or restore to. Multiple instances of the /home switch
are typical. Use a /home switch for each domain and post office to back up. Also use a /home switch
for each post office restore area and any other temporary location to which you want to restore
GroupWise data outside the standard GroupWise directory structure.
Example:
/home-sys:\gwsystem\dev
/ll
Sets the log level to determine how much information is written to GWTSA log file. Use n for
Normal and v for Verbose.
Example:
/ll-v
/log
Turns on logging and displays a logging screen. By default, logging is turned off. When you turn
logging on, a gwtsa.log file is created in the sys:\system\tsa directory.
Example:
/log
/tempdir
Specifies where GWTSA places its temporary files during the backup process. The default is the
sys:\system\tsa\temp directory.
Example:
/tempdir-vol1:\temp
/vserver
Specifies the name of a virtual server in a NetWare cluster. See
a NetWare
Guide.
438 GroupWise 7 Administration Guide
Cluster" in "Novell Cluster Services on
"Backing Up a GroupWise System in
NetWare" in the GroupWise 7 Interoperability