Novell GROUPWISE 7 - DATABASES Manual page 10

Database Automatically or Immediately" on page 654
Automatically or Immediately" on page
To recover a specific database in ConsoleOne:
1 Make sure you have network access to the domain or post office directory for the database you
2 Make sure you have sufficient disk space for the copy of the database that is created during
3 In ConsoleOne, browse to and select the Domain object or Post Office object where you want
4 Click Tools > GroupWise Utilities > System Maintenance.
5 Click Recover Database > Run.
6 When prompted, make sure the Path to Database is correct. If an incorrect path is displayed,
If recovery is successful, the backup database is deleted, and the new domain database is renamed to
wpdomain.db, or the new post office database is renamed to wphost.db.
If recovery fails for any reason, the backup database is copied back to wpdomain.db or
wphost.db. If any data was lost, you are notified by an administrative message.
You have several options for retrieving lost data from other sources:
380 GroupWise 7 Administration Guide
are recovering.
If you have administration rights in the primary domain, you can recover the primary domain
database, the post office databases in the primary domain, and any secondary domain
databases.
From a secondary domain, you can recover the secondary domain database and the post office
databases in the secondary domain.
recovery.
to recover the database.
browse to and select the path to the database being validated. Click OK.
If data has been lost from the primary domain, you can synchronize it with a secondary domain
that is known to contain current information. See
Domain from a Secondary Domain," on page
If data has been lost from a secondary domain, you can synchronize it with the primary domain.
See Section 29.4, "Synchronizing a Secondary Domain," on page
and "Recovering the Post Office Database
526.
Section 29.5, "Synchronizing the Primary
398.
397.