Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Security Camera King Manuals
  4. Security Camera
  5. IPPTZ-EL2IR30X-D2US
  6. Operation manual

Security Camera King IPPTZ-EL2IR30X-D2US Operation Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
IPPTZ-EL2IR30X-D2US
Operation Manual
Version 1.0.0

Advertisement

loading
Need help?

Need help?

Do you have a question about the IPPTZ-EL2IR30X-D2US and is the answer not in the manual?

Questions and answers

Related Manuals for Security Camera King IPPTZ-EL2IR30X-D2US

Summary of Contents for Security Camera King IPPTZ-EL2IR30X-D2US

  • Page 1 IPPTZ-EL2IR30X-D2US Operation Manual Version 1.0.0...
  • Page 2 Table of Contents Network Connection ........................1 Preparation ........................1 Log in ..........................1 Live Interface ......................... 2 Encode Setup ........................ 3 Video Window Setup ....................3 System Menu ......................... 5 Video Window Function Option .................. 5 PTZ Control ........................6 PTZ Setup ........................
  • Page 3 3.1.1 Conditions ......................13 3.1.2 Video ........................24 3.1.3 Audio ........................31 Network ......................... 32 3.2.1 TCP/IP ........................32 3.2.2 Connection ......................34 3.2.3 PPPoE ........................37 3.2.4 DDNS ........................38 3.2.5 IP filter ........................39 3.2.6 SMTP （e-mail） ....................40 3.2.7 UPnP ........................
  • Page 4 Peripheral ........................58 3.4.1 IR Light ........................58 3.4.2 Wiper ........................59 Event ..........................60 3.5.1 Video detect ......................60 3.5.2 Alarm ........................63 3.5.3 Abnormality ......................65 Storage ......................... 67 3.6.1 Record schedule and snapshot schedule/Holiday.......... 67 3.6.2 Destination ......................68 3.6.3 Record control ......................
  • Page 5 3.8.1 Version ........................77 3.8.2 Log .......................... 78 3.8.3 Online User ......................79 Alarm ............................81 Log out ............................82 Important  The following functions are for reference only. Some series products may not support all the functions listed below. ...
  • Page 6 1 Network Connection 1.1 Preparation This series speed dome product supports the Web access and management via PC. Web includes several modules: monitor channel preview, PTZ control, system configuration, alarm and etc. Please follow the steps listed below for network connection. ...
  • Page 7 Figure 1-2 For WIN 7 and higher version of operating system, it is advised to operate as an administrator if it is your first time to log in. 1.3 Live Interface After you logged in, you can see the live monitor window. Now you can operate the speed dome via the WEB.
  • Page 8 Figure 1-3 There are six sections:  Section 1: Encode setup bar  Section 2: Window adjust bar  Section 3: System menu bar  Section 4: Window function option bar  Section 5: PTZ control  Section 6: PTZ function 1.4 Encode Setup The encode setup interface is shown as in Figure 1-4.
  • Page 9 Full screen Click it to go to full-screen mode. Double click the mouse or click the Esc button to exit the full screen. Width and Click it to restore original ratio or suitable window. height ratio Open/close Left click it to display or hide the PTZ control interface. interface The picture setup interface is shown as in Figure 1-6.
  • Page 10  --- Width and height rate. Adjust to original size or suitable for the window.  --- Fluency setup. It has three modes: real-time/general/fluency.  ---Open/close PTZ interface. Left click mouse to display or hide PTZ control interface. 1.6 System Menu System menu is shown as in Figure 1-7.
  • Page 11 You can snapshoot important video. Snapshot You can go to Setup->Camera->Video->Path to modify the local record save path. Click it, system can snap at 1f/s for three times. All images Triple snap are memorized in system storage folder. When you click local record button, the system begins Record recording.
  • Page 12 1.9 PTZ Setup The PTZ setup interface is shown as in Figure 1-10. Figure 1-10 Click PTZ set button, the interface is shown as in Figure 1-11.Here you can select scan, preset, tour pattern, assistant function and etc. Figure 1-11 Please refer to the following sheet for PTZ setup information.
  • Page 13 Parameter Function  Select Scan from the dropdown list, click Start button, you can Scan begin scan operation. Default SN is 1.  Input the preset value and then click View button, the camera Preset turns to the corresponding position of the preset. ...
  • Page 14 2 Playback 2.1 Playback Interface The playback interface is shown as in Figure 2-1. Figure 2-1 You can refer to the following sheet for detailed information. Name Playback control button Date File list Time process format 2.2 Playback Control Button Playback control button is shown as below.
  • Page 15 Figure 2-2 You can refer to the following sheet for detailed information. Name Function Play To start or resume playback. Stop Stop current playback. Frame by frame Play next frame. Please pause playback first if you want to use frame by frame playback function. Slow play Slow playback.
  • Page 16 Figure 2-3 You can refer to the following sheet for detailed information. Icon Name Function Search It is to search record from the start time of you selected date to the previous 24 hours. Stop Click it to download selected file(s) to local Back Click it to go back to calendar interface to select date again.
  • Page 17 2.5 Process bar format You can refer to the following sheet for detailed information. Icon Function Process bar is in 24H mode. It is to display the record files of previous two hours. It is to display the record files of previous one hour.
  • Page 18 3 Setup 3.1 Camera 3.1.1 Conditions Here you can set camera property. Adjust video parameter to get best preview effect. See Figure 3-1. Figure 3-1 Please refer to the following sheet for detailed information. Parameter Function Here you can set camera setup mode. It includes: Config File normal/day/night.
  • Page 19 Zoom It is to set digital zoom/camera zoom rate. You need to check the box here to enable digital zoom function. It is to set camera lens sharpness, and sharpness control level. Sharpness It is to set camera video. It includes: Picture style/hue/brightness/saturation/ chroma control/gamma/picture flip/picture freeze.
  • Page 20 Exposure interface is shown as below. See Figure 3-3. Figure 3-3 Please refer to the following sheet for detailed information. Parameter Function  It is to set camera exposure mode. It includes: Exposure mode auto/manual/aperture has the priority/shutter has the priority.
  • Page 21 If the light may change greatly, you can use slow exposure to Slow exposure get image so that the camera can get stable video. It is to set camera max gain. Max Auto gain In lower illumination environment, you can lower the cameras Slow shutter auto exposure time to capture the image and enhance the definition.
  • Page 22 Figure 3-4 Please refer to the following sheet for detailed information. Parameter Function It is to control noise. The higher the level is; the small the noise 2D NR is. Comparing with the previous one, the picture may become a little bit blurry.
  • Page 23 Figure 3-5 Please refer to the following sheet for detailed information. Parameter Function It is to set camera day/night mode. Day & night The type includes: electronic/mechanical. The mode includes: B&W/color/auto/photosensor. It is to camera day & night switch sensitivity. Sensitivity 3.1.1.5 Focus The focus interface is shown as in Figure 3-6.
  • Page 24 Figure 3-6 Please refer to the following sheet for detailed information. Parameter Function It is to set camera focus mode. It includes: auto/manual/semi Focus mode auto. It is to camera focus distance in case the focus distance is too Focus limit small and the focus goes to the enclosure.
  • Page 25 Figure 3-7 Please refer to the following sheet for detailed information. Parameter Function It is to set camera zoom speed. The bigger the value is, the Zoom speed faster the speed is. Check the box here to enable digital zoom function. Digital zoom 3.1.1.7 Sharpness Sharpness interface is shown as in Figure 3-8.
  • Page 26 Figure 3-8 Please refer to the following sheet for detailed information. Parameter Function It is to set camera sharpness. The higher the sharpness is, the Sharpness clear the image is. The object edge becomes clear too. It is to set camera control level. The higher the value is, the Sharpness strong the control level is.
  • Page 27 Figure 3-9 Please refer to the following sheet for detailed information. Parameter Function It is to set video style. It includes：Standard/soft/ flamboyant. Style It is to set picture hue. It is to set color purity. The higher the purity is, the more color Saturation the video is.
  • Page 28 Figure 3-10 Parameter Function Mode It is to set the camera defog mode, including off and auto. Intensity It is to set defog intensity, able to select only when the defog mode is auto. 3.1.1.10 Default Default interface is shown as in Figure 3-11.
  • Page 29 Figure 3-11 Please refer to the following sheet for detailed information. Parameter Function It is to restore camera parameter to factory default setup. Default 3.1.1.11 Profile Management Profile management interface is shown as in Figure 3-12. Figure 3-12 Please refer to the following sheet for detailed information. Parameter Function There are three modes: normal/full-time/schedule.
  • Page 30 Figure 3-13 Please refer to the following sheet for detailed information. Parameter Function It includes general stream, motion stream and alarm Main Bit stream type stream. You can select different encode frame rates for stream different recorded events. The frame rates of the motion detect and alarm is customized.
  • Page 31 Parameter Function There are two options: VBR and CBR. Bit Rate Type Please note, you can set video quality in VBR mode. In MJPEG mode, the bit stream control mode can only be CBR. Recommended Recommended bit rate value according to the resolution and frame rate you have set.
  • Page 32 Parameter Function Frame Rate PAL: 1～25f/s，NTSC: 1～30f/s.. (FPS) The frame rate may vary due to different resolutions. There are two options: VBR and CBR. Bit Rate Type Please note, you can set video quality in VBR mode. Recommended Recommended bit rate value according to the resolution and frame rate you have set.
  • Page 33 Parameter Function There are two modes: general (schedule) and Event Snapshot type (activation). General (schedule) snapshot is to snap in the specified period. Event (Activation) snapshot Is to snap when the motion detect, camera masking, local alarm event occurrence. If you want to use this function, please make sure: ...
  • Page 34 Figure 3-16 Figure 3-17...
  • Page 35 Figure 3-18 Please refer to the following sheet for detailed information. Parameter Function Select a “privacy mask SN”, click “Draw”, and then you can draw the privacy mask  zone which is corresponding to the privacy mask SN in the video monitoring window. Click “Delete”...
  • Page 36 Parameter Function After you successfully set channel title, time title, OSD Info, you can click Refresh Refresh button to video the effect. 3.1.2.4 Path The storage path interface is shown as in Figure 3-19. Here you can set snap image saved path ( in the preview interface) and the record storage path in the preview interface).The snap picture default setup is C:\PictureDownload and record file default setup is C:\RecordDownload.
  • Page 37 Figure 3-20 Please refer to the following sheet for detailed information. Parameter Function Sampling It is to set the sampling frequency of audio frequency Microphone It is to set the volume of the microphone volume Speaker It is to set the volume of the speaker volume ...
  • Page 38 Figure 3-21 Please refer to the following sheet for detailed information. Parameter Function Host Name It is to set current host device name. Please select the Ethernet port if the device has several Ethernet Card network cards. Mode There are two modes: static mode and the DHCP mode. ...
  • Page 39 IP Version It is to select IP version. IPv4 or IPv6. You can access the IP address of these two versions.  Please note system needs to check the validity of all IPv6 addresses. The IP address and the default gateway shall be in the same IP section.
  • Page 40 3.2.2.1 Connection The connection interface is shown as in Figure 3-22. Figure 3-22 Please refer to the following sheet for detailed information. Parameter Function It is the max Web connection for the same device. The value ranges from 1 connection to 20.
  • Page 41  RTSP port Usually, the default value is 554. You do not need to input again if you are using the default value. When you are using QuickTime (Apple browser) or VLC play real-time video, you can use the following format to play.
  • Page 42 Figure 3-23 3.2.3 PPPoE The PPPoE interface is shown as in Figure 3-24. Input the PPPoE user name and password you get from the IPS (internet service provider) and enable PPPoE function. Please save current setup and then reboot the device to get the setup activated. Device connects to the internet via PPPoE after reboot.
  • Page 43 Figure 3-24 3.2.4 DDNS The DDNS interface is shown as in Figure 3-25. The DDNS is to set to connect the various servers so that you can access the system via the server. Please go to the corresponding service website to apply a domain name and then access the system via the domain.
  • Page 44 Figure 3-25 Please refer to the following sheet for detailed information. Parameter Function Server Type You can select DDNS protocol from the dropdown list and then enable DDNS function. Server IP DDNS server IP address Domain Name Your self-defined domain name. User The user name you input to log in the server.
  • Page 45 3.2.6 SMTP （e-mail） The SMTP interface is shown as in Figure 3-27. Figure 3-27 Please refer to the following sheet for detailed information. Parameter Function Input server address and then enable this function. SMTP Server Port Default value is 25. You can modify it if necessary. For the server supports the anonymity function.
  • Page 46 Parameter Function Input receiver email address here. Max three addresses. Mail receiver The send interval ranges from 0 to 3600 seconds. 0 means Interval there is no interval. Please note system will not send out the email immediately when the alarm occurs. When the alarm, motion detection or the abnormity event activates the email, system sends out the email according to the interval you specified here.
  • Page 47 Figure 3-28 Figure 3-29 3.2.8 SNMP The SNMP interface is shown as in Figure 3-30.
  • Page 48 The SNMP allows the communication between the network management work station software and the proxy of the managed device. Please install the software such as MG MibBrowser 8.0c software or establish the SNMP service before you use this function. You need to reboot the device to activate the new setup.
  • Page 49 Parameter Function The destination address of the Trap information from the Trap address proxy program of the device. The destination port of the Trap information from the proxy Trap port program of the device. It is for the gateway device and the client-end PC in the LAN to exchange the information.
  • Page 50 Figure 3-31 3.2.10 Multicast The multicast interface is shown as in Figure 3-32. Multicast is a transmission mode of data packet. When there is multiple-host to receive the same data packet, multiple-cast is the best option to reduce the broad width and the CPU load. The source host can just send out one data to transit.
  • Page 51 Figure 3-32 3.2.11 IEEE802 IEEE802.1X works standing for local and metropolitan area networks and port based network access control protocol. It supports manual operation of the client to choose means of authenticating by which to control it to access to the Local Area Networks or not. It supports the ability to authenticate, to calculate fee, to ensure security and to maintain requirements.
  • Page 52 Figure 3-33 Please refer to the following sheet for detailed information. Parameter Function Authentication PEAP (protected EAP protocol). It needs the username to login, which is authenticated by the Username server. Password Please input password here. 3.2.12 Qos The QoS interface is shown as below. See Figure 3-34. Qos (Quality of Service) is network security mechanism.
  • Page 53 Parameter Function Real-time The data packet of the network video monitor. monitor Command The non-monitor packet such as device setup and search. 3.3 PTZ 3.3.1 Protocol 3.3.1.1 Network PTZ Setup Network PTZ setup interface is shown as in Figure 3-35. Figure 3-35 Please refer to the following sheet for detailed information.
  • Page 54 Please refer to the following sheet for detailed information. Parameter Function Address It is to set the corresponding speed dome address. The default setup is 1. Baud rate It is to set the baud rate of the camera. The default setup is 9600.
  • Page 55 Set camera rotation speed. PTZ speed Set PTZ movement speed. Idle motion Set camera idle operation. Power up Set camera operation when system boots up. PTZ restart Restart camera PTZ. Default Restore camera PTZ default setup. 3.3.2.1 Preset Preset interface is shown as in Figure 3-38. Figure 3-38 Please refer to the following sheet for detailed information.
  • Page 56 Save Save current preset setup. Click it to add a new preset. Clear Clear all presets setup. 3.3.2.2 Tour Tour interface is shown as below. See Figure 3-39. Figure 3-39 Please refer to the following sheet for detailed information. Parameter Function Tour No.
  • Page 57 Please set presets before you use tour function. Duration It is to set the staying time of the tour. (Interval) Save Click it to save current setup. Refresh Refresh current interface. 3.3.2.3 Scan Scan interface is shown as below. See Figure 3-40. Figure 3-40 Please refer to the following sheet for detailed information.
  • Page 58 Right limit Set camera right limit. 3.3.2.4 Pattern Pattern interface is shown as below. See Figure 3-41. Figure 3-41 Please refer to the following sheet for detailed information. Parameter Function Pattern No. System auto allocates. Begin or stop pattern. Start /Stop Please note this function is null if you have not set a pattern.
  • Page 59 Figure 3-42 Please refer to the following sheet for detailed information. Parameter Function Pan speed It is to set camera pan speed. Start /Stop Check it to start or stop pan movement. 3.3.2.6 PTZ speed PTZ speed interface is shown as below. See Figure 3-43.
  • Page 60 Figure 3-43 Please refer to the following sheet for detailed information. Parameter Function PTZ speed Here you can set camera PTZ speed. 3.3.2.7 Idle Motion Idle motion interface is shown as below. See Figure 3-44.
  • Page 61 Figure 3-44 Please refer to the following sheet for detailed information. Parameter Function Enable Check the box here to enable idle motion function. Here you can set preset, scan, pattern, tour. Idle Motion Please note you need to set the corresponding operation first if you want to use this function.
  • Page 62 Figure 3-46 Please refer to the following sheet for detailed information. Parameter Function PTZ restart It is to reboot PTZ. 3.3.2.10 Default Default interface is shown as below. See Figure 3-47. Figure 3-47...
  • Page 63 Please refer to the following sheet for detailed information. Parameter Function Default Restore PTZ factory default setup. 3.4 Peripheral 3.4.1 IR Light Important Please make sure your purchased camera supports all the functions listed here. The IR light has two interface: zoom has the priority(Figure 3-48)/manual has the priority(Figure 3-49). Figure 3-48...
  • Page 64 Figure 3-49 Please refer to the following sheet for detailed information. Parameter Function Zoom has the Enable IR light when the zoom has the priority. The IR light near priority light value/far light value can automatically switch according to the zoom.
  • Page 65 Parameter Function Mode Able to select manual and timing, timing is default. Interval time The interval from the wiper stops to it begins. Check enable, and you can set the period when the wiper enables. (it only Period exists when the mode is “Timing”) 3.5 Event 3.5.1 Video detect 3.5.1.1 Motion Detect...
  • Page 66 Figure 3-52 Figure 3-53 Please refer to the following sheet for detailed information. Parameter Function Enable You need to check the box to enable motion detection function. Region There are six levels. The sixth level has the highest sensitivity.  ...
  • Page 67 Parameter Function Record System auto activates motion detection channel to record once channel motion detect alarm occurs (working with motion detection function). Please note you need to go to Storage-> Schedule to set motion detect record period and go to Storage->Record control to set current channel as auto record.
  • Page 68 Please refer to the following sheet for detailed information. Parameter Function Enable You need to check the box to enable video masking function. Working  Video masking function becomes activated in the specified Period periods.  There are six periods in one day. Please draw a circle to enable corresponding period.
  • Page 69 Figure 3-55 Please refer to the following sheet for detailed information. Parameter Function Enable You need to check the box to enable this function. Working This function becomes activated in the specified periods.  Period There are six periods in one day. Please draw a circle to enable ...
  • Page 70 Parameter Function Record System auto activates motion detection channel to record once Channel alarm occurs (working with motion detection function). Please note you need to go to Storage-> Schedule to set current channel as general record. Record Delay System can delay the record for specified time after alarm ended. The value ranges from 10s to 300s.
  • Page 71 Figure 3-57 Figure 3-58 Figure 3-59 Figure 3-60 Please refer to the following sheet for detailed information.
  • Page 72 Parameter Function Event The abnormal events include: no SD card, no space, SD card error,  Type disconnection, IP conflict.  You need to draw a circle to enable this function. Record System auto activates channel to record once an alarm occurs (For disconnection type only.
  • Page 73 Figure 3-61 3.6.2 Destination The destination interface is shown as in Figure 3-62. It is to set the storage mode of the speed dome record file or snapshot pictures. There are three options: path/local storage/FTP. You can only select one mode. System can save according to the event types. It is corresponding to the three modes (general/motion/alarm) in the Schedule interface.
  • Page 74 The local interface is shown as in Figure 3-63. Here you can view local SD card information. You can also operate the read-only, write-only, hot swap and format operation. Figure 3-63 The FTP interface is shown as in Figure 3-64. You need to check the box to enable the FTP function. When network disconnect occurred or there is malfunction.
  • Page 75 Figure 3-65 Please refer to the following sheet for detailed information. Parameter Function Here you can select file size. Default setup is 60 minutes. Pack Duration Pre-record Please input pre-record value here. For example, you can input 4 here so that system can read the previous four seconds video before the alarm occurrence from the buffer and record the 4 seconds video in the file.
  • Page 76 Figure 3-66 Please refer to the following sheet for detailed information. Parameter Function It is to set device name. Device Name Video This is to display video standard. Standard Language You can select the language from the dropdown list. The browser can refresh automatically and change the language accordingly.
  • Page 77 Please refer to the following sheet for detailed information. Parameter Function Here you can select date format from the dropdown list. Date format There are two options: 24-H and 12-H. Time Format The time zone of the device. Time zone It is to set system time.
  • Page 78 Figure 3-68 Add user: It is to add a name to group and set the user rights. See Figure 3-69. Here you can input the user name and password and then select one group for current user. Please note the user rights shall not exceed the group right setup. For convenient setup, please make sure the general user has the lower rights setup than the admin.
  • Page 79 It is to modify the user password. You need to input the old password and then input the new password twice to confirm the new setup. Please click the OK button to save. For the user of the account rights, he can modify the password of other users. Figure 3-70 3.7.2.2 Group The group management interface can add/remove group, modify group password and etc.
  • Page 80 Figure 3-72 Modify group Click the modify group button, you can see an interface is shown as in Figure 3-73. Here you can modify group information such as remarks and rights. Figure 3-73 3.7.3 Default The default setup interface is shown as in Figure 3-74. Please note system cannot restore some information such as network IP address.
  • Page 81 Figure 3-74 3.7.4 Import/Export The interface is shown as in Figure 3-75. Figure 3-75 Please refer to the following sheet for detailed information. Parameter Function It is to import the local setup files to the system. Import It is to export the corresponding system setup to your local PC. Export 3.7.5 Auto maintenance The auto maintenance interface is shown as in Figure 3-76.
  • Page 82 Figure 3-76 3.7.6 Firmware update The firmware interface is shown as in Figure 3-77. Please select the upgrade file and then click the update button to begin firmware update. Important Do not turn off the device power, disconnect the device, reboot or shutdown the device during the update period.
  • Page 83 Here you can view system software version, WEB version, release date and etc. Please note the following information is for reference only. Figure 3-78 3.8.2 Log 3.8.2.1 System Log Here you can view system log. See Figure 3-79. Figure 3-79 Please refer to the following sheet for log parameter information.
  • Page 84 Parameter Function Set the start time of the requested log. Start time Set the end time of the requested log. End time You can select log type from the drop down list and then click search Search button to view the list. You can click the stop button to terminate current search operation.
  • Page 85 Figure 3-81...
  • Page 86 4 Alarm Click alarm function, you can see an interface is shown as in Figure 4-1. Here you can set device alarm type and alarm sound setup. When the specified alarm occurred (you have subscribed), system can record the corresponding alarm information on the right pane of the alarm list.
  • Page 87 5 Log out Click log out button, system goes back to log in interface. See Figure 5-1. You need to input user name and password to login again. Figure 5-1 Note:  This manual is for reference only. Slight difference may be found in user interface. ...