Using Bcc Startup Flags On Netware; Using Bcc Startup Flags On Linux; Problems With Bcc Installation On Netware; Identity Manager Drivers For Cluster Synchronization Do Not Start - Novell BUSINESS CONTINUITY CLUSTERING 1.1 SP1 - 9-21-2010 ADMINISTRATION GUIDE FOR OPEN ENTERPRISE SERVER 1 SP2 LINUX Administration Manual

4.7.1 Using BCC Startup Flags on NetWare

On NetWare, edit the
sys:\system\ldbcc.ncf
. Replace flags with any combination of v and/or t. This could include v, vt, t, or
bccd.nlm -flags
tv.

4.7.2 Using BCC Startup Flags on Linux

On Linux, there are two options:

To use the v and t flags, edit the
NOVELL_BCCD_ARGS=
combination of v and/or t. This could include v, vt, t, or tv.
Do not use the d flag with this option.

Stop BCC by entering
opt/novell/bcc/sbin/bccd -flags

4.8 Problems With BCC Installation on NetWare

Occasional problems might exist when installing BCC software on NetWare cluster servers. For
example, you might experience problems expanding an Organizational Unit (OU) when browsing
the eDirectory tree during the BCC installation.
To resolve this and similar problems, rename the
directory on the Windows machine where the installation is being run and restart the Business
Continuity Clustering 1.1 installation program.
4.9 Identity Manager Drivers for Cluster
Synchronization Do Not Start
If the Identity Manager drivers for cluster synchronization will not start, the problem may be caused
by one of the following conditions:

A certificate has not been created. For information, see

The ports used by the driver are not unique and available.
Each eDirectory driver must listen on a different port number. To specify the port number,
access the driver properties in iManager and specify the appropriate port number in the IP
address field. See Section 2.4.1, "Configuring Identity Manager Drivers for the Business
Continuity Cluster," on page 34
The format for specifying the port number in the IP address field is remote IP:remote
port:local port. For example, you could specify something similar to 10.1.1.1:2001:2001. If it
is not being used for other drivers, port 2001 can be used for the User object driver and port
2002 for the Cluster object driver.

The driver has been disabled.
Click the red icon for the driver on the DirXML Driver Overview page. You can enable the
driver by using the radio buttons in the Driver Startup section of the page that displays.
Selecting the Auto Start option is recommended.
file and change the
/etc/init.d/novell-bcc
line to
NOVELL_BCCD_ARGS=-flags
at the server console, then restart it by entering
rcnovell-bccd stop
. Replace flags with any combination of v, t, and/or d.
c:\program files\common files\novell
for more information.
load bccd.nlm
file and change the
. Replace flags with any
"Creating SSL Certificates" on page
Troubleshooting Business Continuity Clustering 1.1
line to
load
/
36.
69