Automatic Range Selection; Manual Range Selection; Battery Saver - Fluke 2063513 Instruction Sheet

Symbols

Automatic Range Selection

The meter defaults to autoranging when you turn it on. The 4000 mV
range can be entered only with manual range selection.

Manual Range Selection

OFF
COM
Battery Saver 
If the meter is ON but inactive and not connected to voltage for more than
45 minutes, the display goes blank to preserve battery life. To resume
operation, press any button.
Battery Saver is disabled in MIN/MAX record mode.
Press button.
Press button to switch between modes.
Double insulation.
Manual ranging mode.
16 MULTIMETER
To return to autoranging, press
2 seconds, or change the measurement
mode.
CAT
600V
+
ip14i.eps
for
ip15i.eps