Diamondback 960 Owner's Manual page 9

960SROM1 9/22/06 1:34 PM
making sure to include a flat and split lock washer on each bolt.
Step 6: Pedal Assembly
Use a 15mm or adjustable open-end wrench to firmly tighten the pedals to the
cranks. The left and right pedals are different and are denoted as right or left (R
or L) on the top & bottom of each pedal. Note that the left pedal will thread
counter-clockwise.
Note: Pedals should be re-tightened after the first 10 hours of use as they may
become loose until they have fully seated to the crank.
Step 7: Power Adapter
7-1. Plug DC adapter into the power jack located on the front of the unit near the
bottom.
7-2. Plug the adapter into a power outlet.
960 Sr Owner's Manual
Page 11
Assembly Instructions
9