Changing The Input Level Of The Sound From Connected Components - Sony DAV IS50 - Bravia Theater Home System Operating Instructions Manual

Changing the input level of the sound from connected
components
Distortion may occur when you listen to a component connected to the TV (AUDIO IN) jacks on the
rear of the control unit. This is not a malfunction and will depend on the component connected.
To prevent distortion, reduce the input level on the control unit.
1
Press FUNCTION repeatedly until "TV" appears in the front panel display.
2
Press SYSTEM MENU.
3
Press X/x repeatedly until "ATTENUATE" appears in the front panel display, then press
or c.
4
Press X/x to select a setting.
• "ATT ON": You can attenuates the input level. The output level is changed.
• "ATT OFF": Normal input level.
5
Press .
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
Note
• "ATTENUATE" appears only when the function is set to the "TV" function.
FUNCTION
X/x/c,
SYSTEM
MENU
33
US