Enjoying Multiplex Broadcast Sound; Changing The Input Level Of The Sound From Connected Components - Sony DAV-DZ790K Operating Instructions Manual

Enjoying Multiplex
Broadcast Sound
(DUAL MONO)
You can enjoy multiplex broadcast sound when
the system receives or plays a Dolby Digital
multiplex broadcast signal.
Note
• To receive a Dolby Digital signal, you need to
connect a TV or other component to the unit with an
optical or coaxial digital cord (page 26) and set the
digital output mode of the TV or other component to
Dolby Digital.
Press AUDIO repeatedly until the desired
signal appears in the front panel display.
• "MAIN": Sound of the main language will be
output.
• "SUB": Sound of the sub language will be
output.
• "MAIN+SUB": Mixed sound of both the main
and sub languages will be output.
Changing the Input Level
of the Sound from
Connected Components
Distortion may occur when you listen to a
component connected to the TV or SAT/
CABLE jacks on the rear panel, or to the
AUDIO IN jack on the front panel. Distortion is
not a malfunction and will depend on the
component connected.
To prevent distortion, reduce the input level on
the unit.
1
Press FUNCTION +/– repeatedly until
"TV," "SAT/CABLE," or "AUDIO"
appears in the front panel display.
2
Press SYSTEM MENU.
3
Press X/x repeatedly until
"ATTENUATE" appears in the front
panel display, then press
4
Press X/x to select a setting.
• "ATT ON": You can attenuate the input
level. The output level is changed.
• "ATT OFF": Normal input level.
5
Press .
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
or c.
97
GB