Sony DAV IS50 - Bravia Theater Home System Operating Instructions Manual page 68

x For the S-AIR receiver
Refer to the operating instructions of the
S-AIR receiver.
When sound transmission is established,
the confirmation display appears.
Note
• Perform the pairing within several minutes after
step 10. If you do not, the pairing is canceled
automatically and the confirmation display
appears. To perform pairing, select [YES]. To
return to the previous display, select [NO].
12
Press C/c to select the next operation.
x To finish pairing
Select [NO], then press
x To perform pairing of another S-AIR
sub unit
Select [YES], then press
Note
• If you perform the pairing operation between the
S-AIR main unit and another S-AIR sub unit
(page 66), sound transmission established by ID is
canceled.
• When you perform pairing, [(PAIRING)] appears
beside ID on the display for selecting ID.
To cancel pairing
Perform the ID setting of the S-AIR main unit
according to the procedure of "To set the ID of
the S-AIR main unit" (page 64). If you select a
new ID (you can select the same ID as before),
pairing is canceled.
If sound transmission is
unstable
For the surround amplifier (not supplied)
For the S-AIR receiver (not supplied)
If you use multiple wireless systems which
sharing the 2.4 GHz band, such as wireless LAN
or Bluetooth, the transmission of S-AIR
products or other wireless systems may be
unstable. In this case, the transmission may be
improved by changing the following "RF
CHANGE" setting.
68
US
1
2
3
.
4
5
.
6
• When the wireless transmitter is not inserted in the
• In most cases, you will not need to change this
• If "RF CHANGE" is set to "OFF," transmission
• The transmission may be improved by changing the
Press SYSTEM MENU.
Press X/x repeatedly until "RF
CHANGE" appears in the front panel
display, then press
Press X/x to select the desired setting.
• "AUTO": Normally select this. The
system change "RF CHANGE" to "ON"
or "OFF" automatically.
• "ON": The system transmits sound by
searching the better channel for
transmitting.
• "OFF": The system transmits sound by
fixing the channel for transmitting.
Press .
The setting is made.
Press SYSTEM MENU.
The system menu turns off.
When you set "RF CHANGE" to "OFF,"
select the ID so that sound
transmission is most stabilized
(page 64).
Note
S-AIR main unit, you cannot set "RF CHANGE".
setting.
between the S-AIR main unit and S-AIR sub unit can
be performed using one of the following channels.
– S-AIR ID A: equivalent channel for Wi-Fi
channel 1
– S-AIR ID B: equivalent channel for Wi-Fi
channel 6
– S-AIR ID C: equivalent channel for Wi-Fi
channel 11
transmission channel (frequency) of the other
wireless system(s). For details, refer to the operating
instructions of the other wireless system(s).
or c.