Installing The Speakers On A Wall - Sony DAV IS50 - Bravia Theater Home System Operating Instructions Manual

Note on handling the subwoofer
• Do not place your hand into the slit of the subwoofer
when lifting it. The speaker driver may be damaged.
When lifting, hold the bottom of the subwoofer.

Installing the speakers on a wall

Caution
• Contact a screw shop or installer regarding the wall material or screws to be used.
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.
• Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
1
Prepare screws (not supplied) that are suitable for the holes of the bracket.
2
Secure the bracket to the wall using hole 1.
Tip
• To prevent the speaker from rotating, use the hole 2, too.
• Do not hold the EZW-T100 slot when lifting the
subwoofer.
• Do not push the top of the subwoofer where the
speaker unit is installed.
Subwoofer
Slits
1
2
3 4
Speaker unit
EZW-T100 slot
continued
13
US