Changing The Input Level Of The Sound From Connected Components; Using The Sleep Timer - Sony DAV-FZ900KW Operating Instructions Manual

Changing the Input Level
of the Sound from
Connected Components
Distortion may occur when you listen to a
component connected to the TV or SAT/
CABLE jacks on the rear panel, or to the
AUDIO IN jack on the front panel. Distortion is
not a malfunction and will depend on the
component connected.
To prevent distortion, reduce the input level on
the unit.
1
Press FUNCTION repeatedly until "TV,"
"SAT/CABLE," or "AUDIO" appears in
the front panel display.
2
Press SYSTEM MENU.
3
Press X/x repeatedly until
"ATTENUATE" appears in the front
panel display, then press
4
Press X/x to select a setting.
• "ATT ON": You can attenuate the input
level. The output level is changed.
• "ATT OFF": Normal input level.
5
Press
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
98
GB
.

Using the Sleep Timer

You can set the system to turn off at a preset
time, so you can fall asleep listening to music.
You can preset the time in 1 or 10-minute
increments.
1
Press SYSTEM MENU.
2
Press X/x repeatedly until "SLEEP"
appears in the front panel display, then
press
3
Press X/x to select a setting.
The minutes display (the remaining time)
changes by 10 minutes.
Tip
• You can select the remaining time by pressing
4
Press
The setting is made and "SLEEP" flashes in
or c.
the front panel display.
5
Press SYSTEM MENU.
The system menu turns off.
or c.
the number buttons. In this case, you can preset
the time in 1-minute increments.
.