Related Manuals for Anmytek D0005
Summary of Contents for Anmytek D0005
- Page 1 Contact Us: service@anmytek.com Rattan Desk with Storage Applicable Item NO.: D0005/D0006 PEOPLE 2 x 1 m 2 HOURS ASSEMBLY TIME REQUIRED FOR ASSEMBLY FLOOR SPACE REQUIRED 1 /17...
- Page 2 Contact Us: service@anmytek.com PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING AND USING THE PRODUCT. SAFETY ADVICE • Keep the product away from fire and inflammable objects. • Do not stand on the product or use the product as a stepladder.
- Page 3 Contact Us: service@anmytek.com Guarantee From Anmytek We offer 12-month warranty for all our products from the date of original purchase. Statement: The product is well-packed with strengthened box and protective foam. Each panel is separately wrapped with soft protective foam, while the hardware is included in a single box.
- Page 4 Contact Us: service@anmytek.com Hardware List Cam Bolt Ø6x35mm Cam Bolt Ø15x10mm Wooden dowel Ø6x30mm Screw Ø3x12mm Screw Ø3x14mm Screw Ø4x25mm Ø4x35mm Screw Sheet Bolt Ø4x18mm Foot Pad Ø6x30mm Ø4x14mm 4 /17...
- Page 5 Contact Us: service@anmytek.com ASSEMBLY DIAGRAM 1 1 3 3 1 1 0 0 AFTER SALES SUPPORT If there damaged or defective, please any parts missing, feel free to contact us for support via the following email. Informaiton required is listed in the last page.
- Page 6 Contact Us: service@anmytek.com ASSEMBLY STEPS Step 1 Step 2 6 /17...
- Page 7 Contact Us: service@anmytek.com ASSEMBLY STEPS Step 3 Step 4 7 /17...
- Page 8 Contact Us: service@anmytek.com ASSEMBLY STEPS Step 5 Step 6 8 /17...
- Page 9 Contact Us: service@anmytek.com ASSEMBLY STEPS Step 7 Step 8 9 /17...
- Page 10 Contact Us: service@anmytek.com ASSEMBLY STEPS Step 9 6 30 1 1 0 0 Step 10 10 /17...
- Page 11 Contact Us: service@anmytek.com ASSEMBLY STEPS Step 11 Step 12 11 /17...
- Page 12 Contact Us: service@anmytek.com ASSEMBLY STEPS Step 13 Step 14 12 /17...
- Page 13 Contact Us: service@anmytek.com ASSEMBLY STEPS Step 15 Step 16 13 /17...
- Page 14 Contact Us: service@anmytek.com ASSEMBLY STEPS Step 17 Step 18 14 /17...
- Page 15 Contact Us: service@anmytek.com ASSEMBLY STEPS Step 19 Kindly note: This is a very important step that can not be skipped. Please follow step 19 to screw the plastic pieces into the corner of the back panel tightly. If you forget to fix these pieces, it may result in the instability of the whole item.
- Page 16 Contact Us: service@anmytek.com How to adjust the door if it is uneven/off? Tips 1: If the door is too low or too high, how to adjust it? Find the height screws shown as below. Loosen those four screws of the hinges, then lift up or lower the door to the suitable height, and tighten all screws finally.
- Page 17 Contact Us: service@anmytek.com WALL FIXING GUIDE NOTE: Supplied wall plugs are only suitable for use in masonry walls. If you have any doubts about using the correct plug for your wall, please seek professional advice. Failure of the product due to using incorrect fixings is the responsibility of the installer.
Need help?
Do you have a question about the D0005 and is the answer not in the manual?
Questions and answers