Schedule In Event Mode - Hawking HNC800PTZ User Manual

Chapter 5 Playback
time interval that associates with the beginning and end time. After having the
settings in "Begin Time", "End Time" and "Period Picker" done, click on the
"Apply" button to confirm the settings. Click on the "Erase" button to clear all
scheduling information just entered. All newly entered scheduling time interval
information will take effect only after the "Apply" button has been clicked.
Apply
Erase
Period picker
Figure 4-9 Period Picker, Apply button and Erase button

4.3.3 Schedule in event mode

You can select to record in Event mode or Continuous mode by the Schedule mode
selector as shown in Figure 4-10. There are two types of event recording, please
refer to Section 4.3.3.1 and Section 4.3.3.2 for more information.
Figure 4-10 Schedule Mode Selector
4.3.3.1 Motion detection
Figure 4-11 Motion Detection Selector
Figure 4-11 shows the window selection you want to record when motion detection
is triggered.
4.3.3.2 Digital input
Figure 4-12 Digital Input Selector