Camera Configurations; The Layout Of The Configuration - Hawking HNC800PTZ User Manual

Management & control software

Hide thumbs Also See for HNC800PTZ:

Table of Contents

3.4 Camera Configurations

When you log in for the first time, you need to configure this application software to

connect to the remote Video Server / Network Camera series products in

"Configuration Menu \ Camera Configuration", as shown in Figure 3-2. You must

have the root (administrator) privilege in order to run the configuration.

Figure 3-2 Camera Configuration

ATTENTION: Once you click on "Configuration Menu\Camera Configuration" for

setting each camera, a warning window will pop up to warn you that all recording

processes will be stopped.

In this section, we discuss the local settings of the connection and the functional

configurations of each camera. If you are interested in the remote settings for each

camera, you can refer to each Video Server / Network Camera series product's user's

manual that was shipped with the hardware.

NOTE: As for the location of the selected camera, you need to make sure the location

string does not include prohibited characters such as ""\ / : * ? " < > |". Otherwise, the

"wrong" location string will cause the application program to malfunction. You can

change the location string in "Video->Text on Video" of the remote setting webpage.

Table of Contents