Hawking HNC300 User Manual
  1. Manuals
  2. Brands
  3. Hawking Manuals
  4. Security Camera
  5. HNC300
  6. User manual

Hawking HNC300 User Manual

Wired/wireless-g network camera
Hide thumbs Also See for HNC300:
Table of Contents

Advertisement

Quick Links

Download this manual
1

Advertisement

Table of Contents
loading

Related Manuals for Hawking HNC300

Summary of Contents for Hawking HNC300

  • Page 2 Trademarks & Copyright Windows 95/98/ME and Windows NT/2000/XP are registered trademarks of Microsoft Corp. All other brands and product names are trademarks of their respective companies. No part of this publication may be reproduced in any form or by any means or used to make any derivative (such as translation, transformation or adaptation) without the express written consent of the manufacturer as stipulated by the United States Copyright Act of 1976.
  • Page 3 HAWKING LIMITED WARRANTY Hawking Technology guarantees that every HNC300 Network Camera and every HNC320G Wireless-G Network Camera is free from physical defects in material and workmanship under normal use for (1) year from the date of purchase. If the product proves defective during this one-year warranty period, call Hawking Customer Service in order to obtain a Return Authorization number.

  • Page 4: Table Of Contents

    About This User’s Manual Introduction System Requirements Features and Benefits Physical Description HNC300 Front Panel Power LED Link LED Rear Panel Network Cable Connector DC Power Connector Reset Button Top Panel Screw Hole Bottom Panel Screw Hole HNC320G Front Panel...
  • Page 5 A. Frequently Asked Questions B. Ping Your IP Address C. Troubleshooting D. Upgrade Firmware E. Time Zone Table F. Xplug Control Installation G. Adjusting the Camera Focus H. Specifications: HNC300 HNC320G How to View Your Camera via the Internet Glossary of Terms...

  • Page 6: About This User's Manual

    This user’s manual gives a full explanation of the HNC300 (Wired) Network Camera and HNC320G Wireless-G Network Camera, including a description of features, installation procedures, web configuration, and other functions. Also included in the user’s manual are the operating procedures for the IPView SE application.

  • Page 7: Introduction

    Thank you for purchasing either the HNC300 Network Camera or the HNC320G Wireless-G Network Camera. HNC300 connects directly to an Ethernet or Fast Ethernet network. The HNC320G can also connect directly to an Ethernet or Fast Ethernet network, but also supports the IEEE 802.11b/g wireless standard. The HNC300 Series (the collective title for the HNC300 &...

  • Page 8: System Requirements

    HNC300 & HNC320G Network: Local Area Network (HNC300 & HNC320G): 10Base-T Ethernet or 100Base TX Fast Ethernet Wireless Local Area Network (HNC320G): IEEE 802.11b/g Wireless LAN Recommended PC or Notebook to Access the HNC300 & HNC320G: For Web Browser Users...

  • Page 9: Features And Benefits

    The HNC300 and HNC320G are standalone systems with built-in CPUs, and thus, require no special hardware or software such as PC frame grabber cards. The HNC300 and HNC320G support both ActiveX mode for Internet Explorer and Java mode for Internet Explorer and Netscape Navigator. Therefore, all that is required is web browser software such as Internet Explorer 5.0 or above, or Netscape 6.0 or above.

  • Page 10: Physical Description

    HNC300 This section describes the externally visible features of the HNC300. Front Panel Power LED The “Power” LED is located to the right of the camera’s lens (when facing the camera). A steady blue light confirms that the camera is powered on.

  • Page 11: Rear Panel

    Rear Panel 10/100 Ethernet Ethernet Cable Port Network Cable Connector The rear panel of the network camera features an RJ-45 connector for 10Base-T Ethernet or 100Base-TX Fast Ethernet connections (using Category 5 twisted-pair cabling). The port supports the N-Way protocol and the “Auto-MDIX” function, thereby allowing the network camera to automatically detect or negotiate the transmission speed of the network.

  • Page 12: Top Panel

    Top Panel Screw Hole Located on the top panel of the network camera, the screw hole is used to connect the camera stand onto the camera by attaching the screw head on the camera stand into the screw hole of the camera. Bottom Panel Screw Hole Screw Hole...

  • Page 13: Hnc320G

    HNC320G This section describes the externally visible features of the HNC320G. Front Panel Power LED The “Power” LED is located to the right of the camera’s lens (when facing the camera). A steady blue light confirms that the camera is powered on. Note: The “Power”...

  • Page 14: Rear Panel

    Rear Panel 10/100 Ethernet Network Cable Connector Antenna Connector Network Cable Connector The rear panel of the wireless network camera features an RJ-45 connector for 10Base-T Ethernet or 100Base-TX Fast Ethernet connections (using Category 5 twisted-pair cabling). The port supports the N-Way protocol and the “Auto- MDIX”...

  • Page 15: Top Panel

    Top Panel Screw Hole Screw Hole Located on the top panel of the wireless camera, the screw hole is used to connect the camera stand onto the camera by attaching the screw head on the camera stand into the screw hole of the wireless camera. Bottom Panel Screw Hole Screw Hole...

  • Page 16: Unpacking The Camera

    Connecting the HNC300/HNC320G to the Camera Stand The HNC300 and HNC320G packages include a camera stand (installation is optional) with a swivel ball screw head that can be attached to the camera’s screw holes. Attach the camera stand to the camera and orient it in the most appropriate position for your specific application.

  • Page 17: Hardware Installation

    This section describes the hardware installation procedures for the HNC300 and HNC320G. HNC300 Connect an Ethernet Cable Connect an Ethernet cable to the Ethernet cable port located on the rear panel of the camera, and attach the other end to the network.

  • Page 18: Hnc320G

    HNC320G Attach Wireless Antenna On the rear panel of the wireless camera, screw into the antenna connector the single external antenna that was included in the product packaging. Connect an Ethernet Cable Connect an Ethernet cable to the Ethernet cable port located on the rear panel of the camera, and attach the other end to the network.

  • Page 19: Attach The External Power Adapter

    Attach the External Power Supply Attach the external power supply to the DC power input connector located on the rear panel of the camera. The input connector is labeled “DC 5V”. Connect it to your local power supply. Note: Confirm that the device is receiving power by making sure that the “Power” LED is illuminated. Please Note: Once you have configured your HNC320G camera so that it is connected to your existing wireless network (i.e.

  • Page 20: Security

    Note: When the HNC300 or HNC320G is used for the first time, it is highly recommended that the administrator set the "Admin ID" and "Admin Password" to restrict users’ access to the cameras since the Default settings are the Null String (i.e., the default Admin ID and Admin Password are blank).

  • Page 21: Web Configuration

    This section describes the web configuration procedures for the HNC300 and HNC320G. Web Configuration The HNC300 and HNC320G must be configured via their built-in Web-based Configuration. Knowledge of local area networks (LANs) will be useful when setting up the cameras.

  • Page 22: System Administration

    System Administration Click on “System Administration” on the “Welcome” screen to access the settings for the network camera. There will be several options to choose from in the menu bar. They are listed below for both, the HNC300 and HNC320G. HNC300...
  • Page 23 System Click System to the right of the text “Internet Camera” to display the device status of your camera. Device Status: The camera’s vital information, including the Camera Name, Location, Model, Firmware Version, MAC Address and IP Address, can be found in this field. Ethernet Status: You can monitor the camera’s network status in this field, including Link (network connection), Speed, and the Duplex mode.
  • Page 24 Network Click Network to the right of the text “Internet Camera” to display the camera’s network status information. Network Status: The items in this field display the camera’s network status information, such as the IP Address, Subnet Mask, Default Gateway, Primary DNS Address, Secondary DNS Address, Dynamic DNS, Secondary HTTP Port, and UPnP.

  • Page 25: System Administration: Configuration

    System Administration: Configuration The Configuration window contains commands for settings that are required for inputting key details to set up the camera for operation. Click Configuration in the top menu bar and the Configuration window will appear as below: System Click on System to the right of the text “Internet Camera”...
  • Page 26 Camera Name: This field is used to enter a descriptive name for the device. The default setting for the Camera Name is CS-xxxxxx, where “xxxxxx” constitutes the last six digits of the device’s MAC Address. The maximum length is 32 characters (printable ASCII). Location: This field is used to enter a descriptive name for the camera’s location.
  • Page 27 Video Click Video to the right of the text “Internet Camera” to configure the camera’s video settings. Video Setting: In this field, you can configure the camera’s basic video settings. Video Resolution: Select the desired video resolution format: Select the desired compression rate. You will have five levels to choose from, Compression Rate: ranging from Very Low to Very High.
  • Page 28 Network Click on Network to the right of the text “Internet Camera” to configure the LAN settings for your camera. TCP/IP: IP Address Mode: This field provides you with three options. They are as follows: Fixed IP – You can select this option and enter the IP address directly. The default settings are: IP Address –...
  • Page 29 PPPoE – If your application requires a direct connection from an ADSL modem through the camera’s RJ-45 LAN port, click this option and enter the User ID and Password into the respective boxes. (You should have an ISP PPPoE account.) The camera will get an IP address from the ISP when it starts up. DNS IP Address: A DNS (Domain Name System) server is an Internet service that translates domain names into IP addresses.
  • Page 30 User Click on User to the right of the text “Internet Camera” to add, edit and delete users for your camera. User Access Control: Access Control: The administrator has the authority to give specific users permission to control the device and make configuration changes by selecting Enable or Disable.
  • Page 31 DateTime Click on DateTime to right of the text “Internet Camera” to set up the time and date for your camera. Date & Time: You can set up the time and date automatically by selecting the Synchronized with Time Server option, or manually in the Set Manually section.
  • Page 32 Upload Click on Upload to the right of the text “Internet Camera” to set up the configuration for the FTP server, time schedule, and manual operation. FTP Server: This field contains the following six basic settings for your FTP server. Host Address: The IP Address of the target FTP server.
  • Page 33 Time Schedule: Select the “Enable upload video to FTP server” option and enter the relevant information, such as the schedule, video frequency and base file name. Schedule: You can 1.) Choose Always to always upload the video to the FTP server, or 2.) Set a Schedule to manage the uploading task.
  • Page 34 Email Click on E-mail to the right of the text “Internet Camera” to configure the E-mail account, time schedule and manual operation settings. E-mail Account: This field contains the following six basic E-mail settings. SMTP Server Address: SMTP (Simple Mail Transfer Protocol) is a protocol for sending e-mail messages between servers.

  • Page 35: System Administration: Tools

    System Administration: Tools The Tools window contains commands for running basic tests, as well as for upgrading and restarting the camera. Click Tools in the top menu bar and the Tools window will appear as below: FTP Server Test Click on FTP Server Test to the right of the text “Internet Camera” to test your FTP server settings. Test FTP Server: Click the Test button to test the FTP server settings.
  • Page 36 Reset “Do you really want to reset this device?” Click the Yes button for this option, and you can restart the camera. (This is equivalent to physically turning the camera off and on again; your settings will stay saved. If you do not want to reset the camera, exit this window without clicking Yes.
  • Page 37 Backup Click the Backup item in the left column to back up the current configuration. Backup Device Configuration to File: “Do you want to backup the configuration to file?” Click the Backup button from this option, and you can save the current configuration to file. Restore Device Configuration from File: You can restore the device configuration from a saved file in the computer.

  • Page 38: System Administration: Help

    System Administration: Help The Help window provides the camera’s most basic information. Click Help in the top menu bar and the Help window will appear as below: About Displays the camera’s model name and version. Once the configuration is completed, click Home to return to the Welcome screen and select the desired video viewing option either through ActiveX Mode or Java Mode as described in the next section.

  • Page 39: Hnc320G

    HNC320G System Administration: Management The Management window contains the information you will need to configure your camera. Click the items in the menu bar to the right of the text “Internet Camera” to view your settings, including: System, Video, Wireless, Network, and User.
  • Page 40 Video Click Video to the right of the text “Internet Camera” to display your camera’s video configuration information. Video Status: The camera’s video configuration information, including the Video Resolution, Compression Rate, Frame Rate, Frame Size and IP Address, can be found in this field. Wireless Click on Wireless to the right of the text “Internet Camera”...
  • Page 41 Network Click Network to the right of the text “Internet Camera” to display the camera’s network status information. Network Status: The items in this field display the camera’s network status information, such as the IP Address, Subnet Mask, Default Gateway, Primary DNS Address, Secondary DNS Address, Dynamic DNS, Secondary HTTP Port, and UPnP.

  • Page 42: System Administration: Configuration

    System Administration: Configuration The Configuration window contains commands for settings that are required for inputting key details to set up the camera for operation. Click Configuration in the top menu bar and the Configuration window will appear as below: System Click on System to the right of the text “Internet Camera”...
  • Page 43 Camera Name: This field is used to enter a descriptive name for the device. The default setting for the Camera Name is CS-xxxxxx, where “xxxxxx” constitutes the last six digits of the device’s MAC Address. The maximum length is 32 characters (printable ASCII). Location: This field is used to enter a descriptive name for the camera’s location.
  • Page 44 Video Click Video to the right of the text “Internet Camera” to configure the camera’s video settings. Video Setting: In this field, you can configure the camera’s basic video settings. Video Resolution: Select the desired video resolution format: Select the desired compression rate. You will have five levels to choose from, Compression Rate: ranging from Very Low to Very High.
  • Page 45 Wireless Click on Wireless to the right of the text “Internet Camera” to configure the wireless LAN settings for your wireless camera. Wireless Interface Connection Mode: Use this option to determine the type of wireless communication for your camera. There are two choices: Infrastructure mode and Ad-Hoc mode.
  • Page 46 To connect the camera to an Ad-Hoc wireless workgroup, make sure that you set the same wireless channel and SSID to match with the PC/Notebook’s configuration for direct wireless communication. Wireless Channel: This pull-down menu allows you to select the appropriate wireless channel for communication.
  • Page 47 Advanced Setting: In this field, you can configure more advanced settings. Beacon Interval: This option defines the time interval between two images sent in succession. Preamble: A preamble is a signal used in wireless environments to synchronize the transmission timing, including Synchronization and Start frame delimiter.
  • Page 48 Network Click on Network to the right of the text “Internet Camera” to configure the LAN settings for your camera. TCP/IP: IP Address Mode: This field provides you with three options. They are as follows: Fixed IP – You can select this option and enter the IP address directly. The default settings are: IP Address –...
  • Page 49 PPPoE – If your application requires a direct connection from an ADSL modem through the camera’s RJ-45 LAN port, click this option and enter the User ID and Password into the respective boxes. (You should have an ISP PPPoE account.) The camera will get an IP address from the ISP when it starts up. DNS IP Address: A DNS (Domain Name System) server is an Internet service that translates domain names into IP addresses.
  • Page 50 User Click on User to the right of the text “Internet Camera” to add, edit and delete users for your camera. User Access Control: Access Control: The administrator has the authority to give specific users permission to control the device and make configuration changes by selecting Enable or Disable.
  • Page 51 DateTime Click on DateTime to right of the text “Internet Camera” to set up the time and date for your camera. Date & Time: You can set up the time and date automatically by selecting the Synchronized with Time Server option, or manually in the Set Manually section.
  • Page 52 Upload Click on Upload to the right of the text “Internet Camera” to set up the configuration for the FTP server, time schedule, and manual operation. FTP Server: This field contains the following six basic settings for your FTP server. Host Address: The IP Address of the target FTP server.
  • Page 53 Time Schedule: Select the “Enable upload video to FTP server” option and enter the relevant information, such as the schedule, video frequency and base file name. Schedule: You can 1.) Choose Always to always upload the video to the FTP server, or 2.) Set a Schedule to manage the uploading task.
  • Page 54 Email Click on E-mail to the right of the text “Internet Camera” to configure the E-mail account, time schedule and manual operation settings. E-mail Account: This field contains the following six basic E-mail settings. SMTP Server Address: SMTP (Simple Mail Transfer Protocol) is a protocol for sending e-mail messages between servers.

  • Page 55: System Administration: Tools

    System Administration: Tools The Tools window contains commands for running basic tests, as well as for upgrading and restarting the camera. Click Tools in the top menu bar and the Tools window will appear as below: FTP Server Test Click on FTP Server Test to the right of the text “Internet Camera” to test your FTP server settings. Test FTP Server: Click the Test button to test the FTP server settings.
  • Page 56 Reset “Do you really want to reset this device?” Click the Yes button for this option, and you can restart the camera. (This is equivalent to physically turning the camera off and on again; your settings will stay saved. If you do not want to reset the camera, exit this window without clicking Yes.
  • Page 57 Backup Click the Backup item in the left column to back up the current configuration. Backup Device Configuration to File: “Do you want to backup the configuration to file?” Click the Backup button from this option, and you can save the current configuration to file. Restore Device Configuration from File: You can restore the device configuration from a saved file in the computer.

  • Page 58: System Administration: Help

    System Administration: Help The Help window provides the camera’s most basic information. Click Help in the top menu bar and the Help window will appear as below: About Displays the camera’s model name and version. Once the configuration is completed, click Home to return to the Welcome screen and select the desired video viewing option either through ActiveX Mode or Java Mode as described in the next section.

  • Page 59: View Image - Activex Mode

    View Image - ActiveX Mode To view video images from the web browser, click on “View Image – ActiveX Mode” on the welcome screen to access the video images from Internet Explorer, as illustrated below: Camera Name* - The Camera name will be display when the Camera Name field is entered in the Web Configuration setting under “System”...

  • Page 60: View Image - Java Mode

    View Image – Java Mode Click on “View Image – Java Mode” from the Welcome screen to access the video images from the Internet Explorer or Netscape browser as illustrated below: Camera Name* - The camera name will be displayed when the Camera Name field is entered in the Web Configuration setting under “Configuration”...

  • Page 61: Applications

    The HNC300/HNC320G can be utillzed in wide variety of applications. The cameras are all-in-one devices and can be attached directly to an Ethernet or Fast Ethernet network. The HNC320G also supports the IEEE 802.11b/g standard. The cameras are standalone systems with built-in CPUs, along with web-based solutions that allow the devices to transmit high quality video images for monitoring purposes.

  • Page 62: Soho (Small Office, Home Office) Applications

    SOHO (Small Office, Home Office) Applications SOHO...

  • Page 63: Ipview Se Application Installation

    Installation Insert the CD-ROM into the CD-ROM drive to initiate the auto-run program. Once completed, a menu screen will appear as follows:...
  • Page 64 To install the IPView SE application, click on “Install IPView Software" to activate the installation procedure for the application program. Once executed, a prompt will appear and request the input of the desired language selection. Make the desired selection and click on “OK” to continue. The Welcome screen will appear.
  • Page 65 The License Agreement prompt will appear, as below. Read the details carefully and click on the “Yes” button to continue with the installation procedure. A prompt will appear and in the Destination Location dialog box, you may click on “Next” to accept the recommended destination location or click on “Browse”...
  • Page 66 The Select Program Folder prompt will appear, providing information on where the IPView SE application will be located. Click on “Next” to continue. If you wish to modify your settings, click on “Back” to return to the previous screens. Please wait until one of the two dialog boxes appears, and then select “Yes, I want to restart my computer now” and click on the “Finish”...
  • Page 67 Or click on the “Finish” button to complete the installation procedure. After successfully installing the IPView SE software application, the application program for the HNC300/HNC320G is automatically installed to \Programs\Files Directory. To start running IPView SE, click on Start Menu/Programs/IPView SE /IPView SE.

  • Page 68: Ipview Se - Getting Started

    This section describes the operation of the IPView SE application User Interface with detailed explanations of procedures for using the application. IPView SE is responsible for management of the preview, configuration, and search of each camera. It incorporates a user-friendly interface for ease of control and navigation, as illustrated below. IPView SE Control Panel System Config Minimum –...

  • Page 69: How To Add Camera

    How to Add a Camera Add Camera Add Camera Click on Add Camera icon to add a new camera. An Add Camera dialog box will appear, as illustrated below. You can enter the IP Address of the camera in the specified field and click the “Add” icon to add a new camera. Note 1: 1.
  • Page 70 3. At the same time, the Gateway IP address can be replaced by URL as below: 4. If you incorrectly input the IP Address you wish to add, a dialog box will appear to notify you of the error. If you are unsure of the camera’s IP address, you can click on the “Browse” button, and the Browse Camera dialog box will appear with a blank screen, as illustrated below.
  • Page 71 If the Login Camera dialog box appears, make sure to enter the correct User Name and Password and click on the “OK” button and the camera will be added into IPView SE in list format. If the User Name and Password are entered incorrectly, the camera will not be added into IPView SE.

  • Page 72: How To Change Cameras

    Camera Config Motion record Assign IP Address to Camera Schedule record Connect / Disconnect Manual record Erase Extra Information How to Change Cameras Assign IP of New Camera To change cameras, click the “Assign IP of Camera” button. An Assign IP of Camera dialog box will appear as illustrated below: You must select the camera and click the Add button to add a new camera.

  • Page 73: How To Connect/Disconnect The Image

    Snapshot – Commands the network camera to take a snapshot picture. Rotate image – Rotates the image of the network camera. Zoom - Click to zoom in and out on the camera’s picture. (Note: The HNC300 and HNC320G feature digital zoom, not true optical zoom.)

  • Page 74: How To Delete A Camera

    Disconnect the Image – Click on the “Connect/Disconnect button again to disconnect the camera. How to Delete a Camera Erase Camera – To delete a camera, you must select the camera to delete from the IPView SE control panel. Then click on the “Erase Camera” button. After deleting, the IPView SE control panel will appear as below.

  • Page 75: Extra Information

    Extra Information Extra Information – Lists camera information. How to Adjust the Property Setting System Configure – The dialog box below will appear. Log Storage: 1. Single HDD Reserve Space: The “Single HDD Reserve Space” permits reserved space by memory size from 500 MB to 1000 MB.
  • Page 76 2. Split Recording File From the “Split Recording File” you can adjust the file size for recording the video images. (The default size for file size recording is 5MB). If the recorded video files reach the file size, video images will be recorded into another file automatically.

  • Page 77: Motion Setting

    Motion Setting – Adjusts the sensitivity level and selects the Invoke Alarm options to work with the motion detection function (if available). Along with Alarm Beep, the Send Email function can also be enabled when motion is detected. The user can define the time interval to send emails. Mail Server: Mail Server IP or name.

  • Page 78: Update Firmware

    Update Firmware Click on the “Update” button and enter the File Path. The firmware will then be updated automatically. If you are unsure of the File path, you can click on the “Browse” icon. The Browse dialog box will appear with a blank screen, as illustrated below.

  • Page 79: How To Adjust The Recording Settings

    How to Adjust the Recording Settings There are three ways to start recording the image: Motion Record, Schedule Record & Manual Record. Motion Record – Recording is triggered when motion is detected (if the motion detection feature is available). You can adjust the sensitivity level and choose the warning options when motion is detected from the motion setting.

  • Page 80: Frequently Asked Questions

    Q: What is the maximum number of users that can be allowed to access the HNC300/HNC320G simultaneously? A: The maximum number of users that can log onto the HNC300/HNC320G at the same time is 64. Please keep in mind that the overall performance of the transmission speed will slow down when many users are logged on simultaneously.

  • Page 81: Ping Your Ip Address

    Q: Can the HNC300/HNC320G be setup as a PC camera on the computer? A: No, the HNC300/HNC320G is an Internet/Network Camera and can only be used on Ethernet and Fast Ethernet networks. The HNC320G can also be used in wireless networks.
  • Page 82 A: The power supply you are using may the source of the problem. Confirm that you are using the DC 5V power supply that has been provided with the HNC300/HNC320G and verify that the power supply is well connected. Q: Why does the Link LED not light up properly? A1: There might be a problem with the network cable.

  • Page 83: Upgrade Firmware

    Q: Noisy images occur. What can I do to fix this? A1: The video images might be noisy if the HNC300/HNC320G is used in a very low light environment. To resolve this issue, place the camera in a location with better lighting.

  • Page 84: Time Zone Table

    E. Time Zone Table...

  • Page 85: Xplug Control Installation

    F. Xplug Control Installation Installation To Web Server Important Information It is highly recommended to install the Xplug Control application to the Web Server for IE 5.0. installed to a Public Domain with a Fixed IP address. 1. Installation: Copy the “xplug.ocx” file to any WEB Server table. 2.
  • Page 86 Installation To Local PC Insert the CD-ROM into the CD-ROM drive to initiate the auto-run program. Once completed, a menu screen will appear, as follows: To install the Xplug Control (ActiveX control), click on the "Install X Plug" button to activate the installation procedure for the plug-in program.
  • Page 87 The Welcome screen will appear. Click on the “Next” button to proceed with the installation. The License Agreement prompt will appear as below. Read the details carefully and click on the “Yes” button to continue with the installation procedure. Click on the “Finish” button to complete the setup of the Xplug Control Utility program for the network camera.

  • Page 88: Adjusting The Camera Focus

    G. Adjusting the Camera Focus The HNC300/HNC320G features an exchangeable CS-type lens that can be used for different applications as necessary. It supports rotational focus control so the lens can be adjusted to focus under normal and stable conditions to maximize the image quality of the camera.

  • Page 89: H. Specifications: Hnc300

    H. Specifications HNC300 Video Specifications Resolution: 640 x 480 pixel Sensor: 1/3” color CMOS sensor Gain control: Automatic Exposure: Automatic White Balance: Automatic Shutter: Electronics 1/60 ~ 1/15000 sec Minimum Illumination: 2.5 lux@f1.4, 3000K color Focal Length: 6.0 mm Aperture: F=1.8...
  • Page 90 Browser Support System requirements: CPU: Pentium II, 266 MHz or above Memory Size: 32 MB (64 MB recommended) VGA card resolution: 800x600 or above Internet Explorer 5.0 or above (ActiveX & JAVA Mode – View Images with Windows OS; JAVA Mode – View Images with other OS) Netscape 6.0 or above (JAVA Mode –...

  • Page 91: Hnc320G

    HNC320G Video specification Resolution: 640 x 480 pixel Sensor: 1/3” color CMOS sensor Gain control: Automatic Exposure: Automatic White Balance: Automatic Shutter: Electronics 1/60 ~ 1/15000 sec Minimum Illumination: 2.5lux@f1.4, 3000K color Focal Length: 6.0 mm Aperture: F=1.8 Focus Extent: 20 cm - Image (Video Setting) Image compression:...
  • Page 92 Browser Support System requirements: CPU: Pentium II, 266 MHz or above Memory Size: 32 MB (64 MB recommended) VGA card resolution: 800x600 or above Internet Explorer 5.0 or above (ActiveX & JAVA Mode - View Images for windows OS; JAVA Mode –View Images for other OS) Netscape 6.0 or above (JAVA Mode - View Image) IPView SE Application...

  • Page 93: How To View Your Camera Via The Internet

    I. How to View Your Camera via the Internet The steps outlined below will help you install your camera behind a router: Camera Identification Open the camera’s web page by typing its IP address in your web browser, and click on “Configuration”. If you are not taken directly to the “System”...
  • Page 94 Opening a Second Port You will need to open unique ports for each camera in order to be able to view them remotely over the Internet. The “Second HTTP Port” option in the “Network” page of the camera’s “Configuration” section is used for two reasons: a.
  • Page 95 For multiple cameras, if you choose to use the default IP address of 192.168.0.20, it is recommended that you assign it to the last camera you install. This will help you avoid any conflicts among the IP addresses. To view the camera over the Internet, you will need to configure your router for Port Mapping. The router’s user manual will include instructions on how to do this.
  • Page 96 address when enabling your camera to be viewed over the Internet. To view your camera remotely via the Internet, it is recommended (but not required) that you assign a static IP address to your router. You will need to contact your ISP to obtain a static IP address. When the camera is attached to the router, the static IP address will allow you to view the camera over the Internet.
  • Page 97 In the “Port Number” field, enter “Port 80 to Port 80” if you intend to you use the camera’s default port settings (discussed earlier in this Appendix). If you do not intend to use the default settings, or if you will be using multiple cameras, you will need to enter a different port number (i.e., 83, 84, etc.).

  • Page 98: Glossary Of Terms

    J. Glossary of Terms Numbers 10BASE-T 10BASE-T is (10Mbps) Ethernet over UTP Category III,IV, or V unshielded twisted-pair media. 100BASE-TX The two-pair twisted-media implementation of 100BASE-T is called 100BASE-TX (100Mbps Fast Ethernet). 802.11g An IEEE standard for wireless local area networks. It offers transmissions speeds of up to 54 Mbps in the 2.4-GHz band.
  • Page 99 DHCP Dynamic Host Configuration Protocol was developed by Microsoft and is a protocol for assigning dynamic IP addresses to devices on a network. With dynamic addressing, a device can have a different IP address every time it connects to the network. In some systems, the device's IP address can even change while it is still connected.
  • Page 100 Group Groups consist of several user machines that have similar characteristics, such as being in the same department. Short for hexadecimal, “HEX” refers to the base-16 number system, which consists of 16 unique symbols: the numbers 0 to 9 and the letters A through F. For example, the decimal number 15 is represented as F in the hexadecimal numbering system.
  • Page 101 JAVA Java is a programming language that is specially designed for writing programs that can be safely downloaded to your computer through the Internet without the fear of viruses. It is an object- oriented multi-thread programming best for creating applets and applications for the Internet, Intranet and other complex, distributed networks.
  • Page 102 Protocol Communication on the network is governed by sets of rules called protocols. Protocols provide the guidelines devices use to communicate with each other, and thus they have different functions. Some protocols are responsible for formatting and presenting data that will be transferred from file server memory to the file server’s network adapter.
  • Page 103 Transceiver A transceiver joins two network segments together. Transceivers can also be used to join a segment that uses one medium to a segment that uses a different medium. On a 10BASE-5 network, the transceiver connects the network adapter or other network device to the medium. Transceivers also can be used on 10BASE-2 or 10BASE-T networks to attach devices with AUI ports.

This manual is also suitable for:

Hnc320g

Table of Contents