Hawking HNC800PTZ User Manual page 31

Chapter 2 Monitor
Red
The red light indicates the connection to server has been unexpectedly
disconnected, such as power outage, and Monitor is trying to reconnect to the
server.
Blink
If the motion detection mechanism is set in the remote Video Server / Network
Camera series product, the light corresponding to the channel will blink if a
motion event is detected.
Recording
Selected channel
If you do not want to monitor one video, you can click, drag, and drop the video (in
the video area) to the trashcan in the common control area of the Monitor tool. The
following shows the step-by-step procedure of "drag and drop".
Figure 3-16 Channel Area
Not connected (no video)
Connected and monitoring
Reconnecting
Configured channel
Not configured channel
Trashcan