Input/Output Control Tools - Hawking HNC800PTZ User Manual

Chapter 2 Monitor

3.6.3 Input/Output Control Tools

PTZ Control
Digital Input /
Digital Output
This application software provides another three tools, shown in Figure 3-25 in the
bottom-left corner, for controlling the remote Video Server / Network Camera series
product of the associated channel. You can click on the dedicated buttons to switch
to different control tools that include PTZ (Pan/Tilt/Zoom) control, DI/DO (Digital
Input / Digital Output) control and Alert Message receiver.
3.6.3.1 PTZ Control
The PTZ (Pan / Tilt / Zoom) tool is shown in Fig 3-26 in the bottom-left corner. If
the remote Visual Server/ Network Camera series product associated with the
selected channel is connected with a PTZ enabled camera, this PTZ control tool will
be activated. You can do PTZ operations, as well as going to the preset location set
by the previously user-defined position. Auto-pan and auto-patrol are enabled when
the selected channel is associated with PT Network Camera series product. You can
also apply PTZ control to several cameras simultaneously. See Section 3.6.8.
Figure 3-25 Input/Output Control Tool
Alert Message