Alert Message - Hawking HNC800PTZ User Manual

Chapter 2 Monitor
The color of the DI status is depicted as follows.
OFF
When the color of the channel number is gray, that means this channel is not
connected to any remote Video Server / Network Camera series product.
Red
The channel number turns red indicating the DI of the remote Video Server /
Network Camera series product associated with the selected channel is in high
level.
Blue
The channel number turns blue if the DI of the remote Video Server / Network
Camera series product associated with the selected channel is in low level.

3.6.3.3 Alert Message

If you select the check box for "Enable Motion Detect" or "Enable Digital Input" in
the path "Configuration Menu \ Camera Configurations \ Alert Settings", the alert
message will show in the window as shown in Figure 3-28; refer to "Alert Settings"
in Section 3.4.3. An alert message appears in this window when an alert is triggered
by user defined motion detection or a digital input level change. You can also use the
scroll bar of this box to check on the alert event's history.
The message format is described as follows:
Figure 3-28 Alert Message