Schedule With Time Picker - Hawking HNC800PTZ User Manual

Figure 4-7 Hour time-line
4.3.1.4 Marking/Unmarking the Recording Time
You only need one click on the left mouse button to mark the time on this time-line.
The operating method for the hour time-line is the same as that of the week
time-lines. Please refer to Section 4.3.1.1 for details.

4.3.2 Schedule with Time Picker

4.3.2.1 Begin and End Time
Hour picker
Minute picker
Day picker
Figure 4-8 Begin Time and End Time Selectors
There are three controlling units in both "Begin Time" and "End Time" selectors, as
shown in Figure 4-8. The first part of each of these two selectors is the Day Picker.
You can select the day of the week with it and set the beginning time and the ending
time for the recording interval.
The second and third units are the Hour Picker and the Minute Picker. You can
change the hour and minute settings for the beginning and ending time with them.
NOTE: Normally, the time set in "Begin time" must be earlier than that in "End
time". But if this is not the case, it means the time is over two days.
4.3.2.2 Add and Erase Buttons
After you have selected the time period with the "Begin time" and "End time"
pickers, you can apply the period picker, shown in Figure 4-9 and set the type of