Hawking HNC800PTZ User Manual page 16

This area displays the status of each channel. The information indicates the status
of connection, recording, selection, and alert-event triggered.
Video area
In this area, you can see the video of the selected channel in the display frame.
The number of display frames in the video area depends on the layout chosen by
the user. You can also do some convenient controls for the video display in it.
Layout area
You can change different monitoring layouts in this area. There are six kinds of
layouts the user can choose from: 1, 4, 6, 9, 13, or 16 video display frames in the
video area.
Hard disk status
In this area, you can get the status of the hard disk that the video database resides
in. This reminds you to arrange for available storage size of the recorded video
database. If the path set for recording is no longer valid or does not exist any
more, the free space will show "Invalid Path" to remain you to update the setting.
Common control area
This area includes volume controller, manual recording, video printing, and
snapshot, as well as a trash can to remove any video from display frames.
PTZ control
In this area you can do PTZ control, auto pan, auto patrol, and preset location
control of the selected channel. The camera must be a remote Visual Server /
Network Camera series product that supports PTZ functions.
DI/DO control
This tool receives digital input signal and sends digital output signal to the
remote Video Server/ Network Camera series product associated with the
dedicated channel.
Alert Message
This tool allows the display of the latest alert messages received from the remote
Video Server / Network Camera series product associated with the selected
channel.