Invicta Instruction Manual And Warranty page 20

chrono graphs wiTh BIG date anD day
adjusting the Chronograph Hands to Zero Position
Before using the chronograph functions, please ensure that the crown is
in position 0 and the 4 chronograph hands are precisely at zero position
following activation of push-button B. Should this not be the case, the
positions of the hands must be adjusted.
. Pull out the crown to position . all three chronograph hands are in their
correct or incorrect zero position.
. Keep push-button A and B depressed simultaneously for at least 2
seconds. The center stop-second rotates 360º and corrective mode is
activated.
Adjusting the center stop second
single step: press push-button a 1 x short
continuous: press push-button a 1 x long

chrono graphs wiTh BIG date anD day
adjusting the Chronograph Hands to Zero Position
To adjust the next hand: press push-button B.
Adjusting the /0 sec counter hand (position h)
single step: press push-button a 1 x short
continuous: press push-button a 1 x long
To adjust the next hand: press push-button B.
Adjusting the minute counter hand (position h)
single step: press push-button a 1 x short
continuous: press push-button a 1 x long
. Push the crown back into position 0. Termination of the chronograph
adjustment can be carried out at any time.