Table of Contents
Advertisement
chrono graphs
Measuring accumulated time
. Start: press push-button a. start timing.
. Stop: press push-button a.
. Restart: press push-button a. Timing is resumed.
. Stop: press push-button a. final time is displayed. accumulation of timing
can be continued by pressing push-button a.
. Reset: press push-button B. The chronograph hands will be reset to their
zero positions.
. Start: press push-button a. start timing.
. Display interval: press push-button B. Timing continues in the
background.
. Making up the measured time: press push-button B. The three
chronograph hands are quickly advanced to the ongoing measured
time. further intervals can be displayed by pressing push-button B.
. Stop: press push-button a. final time is displayed.
. Reset: press push-button B. The chronograph hands will be reset to
their zero positions.
chrono graphs
Measuring Intermediate time
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the INVICTA and is the answer not in the manual?
Questions and answers
How do I adjust the watch band on the coalition forces Vulcan X
To adjust the watch band on the Invicta Coalition Forces Vulcan X, follow these steps:
1. Identify the direction of the arrows on the bracelet, which indicate the direction to push the pins.
2. Use the quick release band adjustment tool to push the pins in the direction of the arrows.
3. Once the pin is partially released, remove it completely with your fingers.
4. If needed, repeat the process to remove additional links.
5. To reassemble, insert the pin back in the opposite direction it was removed.
6. Use a mallet to gently tap the pin into place.
This method allows you to resize the watch band easily.
This answer is automatically generated