Table of Contents
Advertisement
waTches wiTh alarM
Setting the time and date
. Pull out the crown to position . The watch continues to run.
. Turn the crown until yesterday's date appears.
. Pull out the crown to position . The second hand stops. The display
changes from alarm time to reference time.
. Turn the crown until the correct date appears. observe aM/pM clock
rhythm.
. Continue to turn the crown until the correct time appears.
. Push the crown back into position 0. The display changes from reference
to alarm time.
! PLeASe NoTe . resetting the time also requires the identical correction of
the reference time. please refer to "setting the reference time".
display Elements
Minute hand
Hour hand
Small minute hand
Small hour hand
Second hand
Date
waTches wiTh alarM
Control Buttons
0
1
2
Crown
Push Button
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the INVICTA and is the answer not in the manual?
Questions and answers
How do I adjust the watch band on the coalition forces Vulcan X
To adjust the watch band on the Invicta Coalition Forces Vulcan X, follow these steps:
1. Identify the direction of the arrows on the bracelet, which indicate the direction to push the pins.
2. Use the quick release band adjustment tool to push the pins in the direction of the arrows.
3. Once the pin is partially released, remove it completely with your fingers.
4. If needed, repeat the process to remove additional links.
5. To reassemble, insert the pin back in the opposite direction it was removed.
6. Use a mallet to gently tap the pin into place.
This method allows you to resize the watch band easily.
This answer is automatically generated