Table of Contents
Advertisement
waTches wiTh alarM
Setting the reference time
Parallel to the current time, the reference time runs in the background: the
alarm time refers itself to this reference time. thus, resetting the time also
requires the identical correction of the reference time.If the reference time is
not synchronised with the current time, this results in the alarm signal being
emitted at a different time to the set alarm time.
. Pull of the crown to position . The second hand stops. The display
changes from alarm time to reference time. To set your watch to the
exact second, the crown must be pulled out when the second hand is
in position 0.
. Press the push-button for at least seconds. until the small minute
hand jumps forward one minute and setting mode is activated.
Short pressing: less than 1 second:
The reference time is moved forward by the minute.
Medium pressing: 1-2 seconds:
The reference time is moved forward by the hour.
Long pressing: longer than 2 seconds:
The reference time is moved forward until the push-button is released.
. Push the crown back into position 0. To set it to the exact second,
the crown must be pushed back into position 0 at the exxact second.
The display changes from reference time to alarm time. a signal indicates
that the alarm is switched off.
waTches wiTh alarM
Setting the reference time
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the INVICTA and is the answer not in the manual?
Questions and answers
How do I adjust the watch band on the coalition forces Vulcan X
To adjust the watch band on the Invicta Coalition Forces Vulcan X, follow these steps:
1. Identify the direction of the arrows on the bracelet, which indicate the direction to push the pins.
2. Use the quick release band adjustment tool to push the pins in the direction of the arrows.
3. Once the pin is partially released, remove it completely with your fingers.
4. If needed, repeat the process to remove additional links.
5. To reassemble, insert the pin back in the opposite direction it was removed.
6. Use a mallet to gently tap the pin into place.
This method allows you to resize the watch band easily.
This answer is automatically generated