Table of Contents
Advertisement
chrono graphs wiTh BIG date anD day
Setting the time, day and date
. Pull out the crown to position .
. Turn the crown until you reach the correct date. if you change the date
between 9:00pm and 12:00pm, it must be set to the following day as
dates set between these hours do not automatically change at midnight.
. Pull out the crown to position .
. Turn the crown clockwise until you reach the correct time.
. Turn the crown counterclockwise until you reach the correct day.
. Push the crown back into position 0. The watch will begin running again.
chrono graphs wiTh BIG date anD day
Before using the chronograph functions, please ensure that the crown is
in position 0 and the 4 chronograph hands are precisely at zero position
following activation of push-button B. Should this not be the case, the
positions of the hands must be adjusted.
. Start: press push-button a.
. Stop: press push-button a again and read the 3 chronograph counters.
. Reset: press push-button B. The three chronograph hands will be reset
to their zero positions.
Basic Function . Start/Stop/reset
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the INVICTA and is the answer not in the manual?
Questions and answers
How do I adjust the watch band on the coalition forces Vulcan X
To adjust the watch band on the Invicta Coalition Forces Vulcan X, follow these steps:
1. Identify the direction of the arrows on the bracelet, which indicate the direction to push the pins.
2. Use the quick release band adjustment tool to push the pins in the direction of the arrows.
3. Once the pin is partially released, remove it completely with your fingers.
4. If needed, repeat the process to remove additional links.
5. To reassemble, insert the pin back in the opposite direction it was removed.
6. Use a mallet to gently tap the pin into place.
This method allows you to resize the watch band easily.
This answer is automatically generated