Aastra 622d Manual

Document designation
• Document number: eud-1467 / 1.1
• Copyright © 05.2012 Aastra Technologies Limited
General information
Your device has been supplied with a quick user's
guide, safety information and, where applicable,
with other device-specific information. You will find
this and other documents for your device at
www.aastra.com or ➃: www.aastra.com/docfinder.
Communication systems
Your telephone can be used with different com-
munication systems; therefore, the operation dif-
fers according to system. The availability of the
functions, features, key assignments and prod-
ucts also depends on the communication sys-
tem.
Mark your communication system as follows:
System
➀ Aastra 5000 ❏, Aastra X Series ❏, NeXspan ❏
Aastra 800 ❏, OpenCom 100 ❏,
➁
OpenCom 1000 ❏
➂ SIP-DECT® ❏
➃ Aastra 400 ❏, Aastra IntelliGate ❏
➄ MX-ONE SIP-DECT® ❏
Keys
Aastra 622d
Call key:
• Set up a connection.
• R-key function.
Redial list:
• ➀/➁/➂/➄: Press and hold down
the Call key.
• ➃: Press the Call key.
End key:
• Cut connection.
• Exit editor without changes.
• In a menu: Back to idle state.
• Press and hold down: Activate/de-
activate phone.