Etc/Sysconfig/Pcmcia; Etc/Sysconfig/Radvd; Etc/Sysconfig/Rawdevices; Etc/Sysconfig/Samba - Red Hat ENTERPRISE LINUX 4.5.0 Reference Manual

about what parameters are available for this file, use a Web browser to view the following file:
/usr/share/doc/ntp-<version>/ntpd.htm
By default, this file sets the owner of the
1.27.

/etc/sysconfig/pcmcia

The
/etc/sysconfig/pcmcia
following values may be used:
• , where
PCMCIA=<value>
• — PCMCIA support should be enabled.
yes
• — PCMCIA support should not be enabled.
no
• , where
PCIC=<value>
• — The computer has an i82365-style PCMCIA socket chipset.
i82365
• — The computer has a tcic-style PCMCIA socket chipset.
tcic
•
PCIC_OPTS=<value>
•
CORE_OPTS=<value>
•
CARDMGR_OPTS=<value>
as for quiet mode,
-q
on). Read the
cardmgr
1.28.

/etc/sysconfig/radvd

The
/etc/sysconfig/radvd
The daemon listens for router requests and sends router advertisements for the IP
radvd
version 6 protocol. This service allows hosts on a network to dynamically change their default
routers based on these router advertisements. For more information about available parameters
for this file, refer to the
process to the user
radvd
1.29.

/etc/sysconfig/rawdevices

The
/etc/sysconfig/rawdevices
/dev/raw/raw1 /dev/sda1
/dev/raw/raw2 8 5
1.30.

/etc/sysconfig/samba

ntpd
file is used to specify PCMCIA configuration information. The
is one of the following:
<value>
is one of the following:
<value>
, where is the socket driver (
<value>
, where is the list of
<value>
, where is the list of options for the PCMCIA
<value>
to look for loadable kernel modules in the specified directory, and so
-m
man page for more information.
file is used to pass arguments to the
man page. By default, this file sets the owner of the
radvd
.
file is used to configure raw device bindings, such as:
(where is the version number of
<version>
process to the user
ntp
i82365
options.
pcmcia_core
radvd
/etc/sysconfig/pcmcia
ntpd
.
or ) timing parameters.
tcic
(such
cardmgr
daemon at boot time.
radvd
).
43